Meraki

JacobXL · ‎Dec 13 2021

Hi, Tehsin, Were you able to identify the root cause of this issue I am having the same issue except I am using the local DHCP server service on the Meraki it self.

PhilipDAth · ‎Feb 17 2021

>Lastly, do I need to have Cisco Meraki support turn off the lower encryption (3DES?) that is being used for the VPN client currently, to pass the PCI scans? They can't. They can only specify one setting.

PhilipDAth · ‎Nov 14 2020

You could also configure Windows NRPT to resolve this. https://docs.microsoft.com/en-us/powershell/module/dnsclient/add-dnsclientnrptrule?view=win10-ps For example to route all DNS requests for company.local to the internal AD server 10.0.0.1: dd-DnsClientNrptRule -Namespace "company.local" -NameServers "10.0.0.1"

DarrenOC · ‎Oct 1 2020

Hi @Tehsin , firstly, is the MX registered out to the cloud and operational? Are you using DDNS on the MX, are you connecting in via host name or IP? https://documentation.meraki.com/MX/Other_Topics/Dynamic_DNS_(DDNS) Are you seeing the vpn traffic hit your internet interface on the MX? You should be able to see this via a packet capture. if you’re not seeing that traffic your net gear may need to be configured with port forwarding for the vpn traffic. Ports 500 and 4500

DensyoV · ‎Aug 23 2020

Hi, you can whitelist the device for testing to confirm if there is any security filtering enabled that is blocking the traffic. If it works properly when whitelisted, review your layer 3, content filtering and layer 7 FW rule configuration making sure it is not blocking outlook traffic. Lastly, as suggested you can take the Wireshark packet capture.

Meraki

Community

About Tehsin

Tehsin

Community Record

Badges

Re: VPN Shared Network Drives Prompt for Password

Re: Meraki MX64 Windows 10 VPN setup resets

Re: MX64 Routing local DNS server Local Domain

Re: MX64 behind a netgear router

Re: Meraki mx64 Outlook not working