The offending SNORT rule has been removed and Meraki stated things should be fully resolved by 3PM PDT.  So I'd say the conservative approach would be to wait 30 minutes then switch IDS to prevent.  I allow-listed the offending rule and stayed on prevent - for me this resolved the issue almost immediately. ... View more

I only added the allow list entry to rule to a couple networks but now see it on more.  Did Meraki add that entry themselves as a work around while things get worked out between MS, SNORT and Meraki? ... View more

I added a link to this thread in my case (07948308).  I have been lucky as this is occurring infrequently for me and only affects a couple APs at a time.  However, what is the point of a dashboard if you can trust it and its notifications. ... View more

I had a very similar experience (Wi-Fi 6 AP running 28.6 shows offline, continues to server clients, didn't respond to ping, I could get to the local status page of the AP from a connected client, cycling the switch port on my MS switch resolved it or it self- resolved after time).  I opened a ticket and support asked that I don't cycle the port and let them know next time it happens.  It hasn't happened since.  I also have some peers who are also seeing this occur. ... View more

Giacomo,   I appreciate the frequent updates in the thread.  While I have opened a case to request a reason for the outage, I feel that an issue of this magnitude deserves a more official and transparent response.  Root cause and immediate fix information both matter but I believe that future prevention/mitigation is what most of us admins will want to see.  This is what will let us assure our teams, supervisors, and c-levels that this tech stack is still the way to go in our orgs.   -J- ... View more

@cmr What is the license part number that goes with MS-SOCK-12? ... View more

I have also had better luck with the Powershell script to add the VPN for Windows 10 clients but still run into the occasional computer that drops settings.  It'd be nice to use AnyConnect, even nicer if I can transfer my perpetual AnyConnect licenses from my ASAs to new MXs. ... View more

This post was sent over my AnyConnect session on an MX100. So the MX100 and MX84 will support AnyConnect. We got you too!.  This is good news.  I'd be happy with an MX84 replacement but will be glad to use AnyConnect on my existing device.  Should we contact our rep if we want to be included with this next beta phase? ... View more