Community Record
29
Posts
2
Kudos
2
Solutions
Badges
Feb 6 2022
7:45 PM
Does anyone know of a way , I can't find how to set the power transmit on the dashboard, just add the radio transmit section for the mr-12 type access point as below with the status always "off", how to fix it?
... View more
Labels:
- Labels:
-
Other
-
RF Spectrum
Jun 12 2019
2:57 AM
VLANs are as the road and parking gate. When the motorcycles and cars on the road, they drive together on one road. It's called a VLAN trunk. When they go to the parking gate, they will be separated on each gate. It's called VLAN Access. Motorcycles and cars are the VLAN ID.
... View more
Dec 11 2018
12:22 AM
@AjitKumar Thank you for your explanation. But, that's true. I only make sure there's no another configuration for this in Meraki. It's solved by allowing VPN Client subnet to connect to the computer (Win 10). I opened windows services which I needed (e.g. ICMP & SMB protocol). Thank you for your help 🙂
... View more
Dec 5 2018
8:45 PM
Dear Friends, ------------------------------------------------------------------- Local Network Subnet: 10.1.62.0/24 Resource (Win 10): 10.1.62.216 VPN Client Subnet: 192.168.10.0/24 ------------------------------------------------------------------- I have already connected to VPN Client on Meraki from the internet. When I was trying to ping the Resource, it cannot be done. But, when I disabled the firewall on the Resource, It can be accessed. Actually, what specific services/ports should be allowed on the Resource? So, I don't need to disable the firewall?
... View more
Dec 5 2018
8:31 PM
@PhilipDAth Thank you
... View more
Dec 3 2018
7:18 PM
@PhilipDAth Okay, in practice I have been using it. I am only confused with native VLAN tag why cannot use it when using it in VLAN tag. Thank you for your response.
... View more
Dec 3 2018
2:39 AM
@PhilipDAth. Yes, of course, my switch port is configured trunk port. In this case, VLAN 100 is my native VLAN. So, can the client connect to the SSID with tagged VLAN 100? Although it can be done by configuring with untagged VLAN.
... View more
Dec 3 2018
1:13 AM
@rhbirkelund I want to the client can connect to the SSID with VLAN 100 with tagged VLAN.
... View more
Dec 2 2018
8:31 PM
Is it this configuration affects the problem that I have before? When I set the VLAN Tagging on SSID to VLAN 300, the client can connect to SSID.
... View more
Dec 2 2018
6:50 PM
HI, I cannot get IP Address when using the VLAN Tagging. But if I didn't use the VLAN tagging, it can do. I set the VLAN Tagging on SSID with network 10.1.62.0/24. Anybody can help this? Thank you.
... View more
Nov 7 2018
8:11 PM
@NolanHerring It has better performance for now after I changed the channel with channel 1. But, I'm still monitoring this in the future. Because the non 802.11 interference is still high, but the performance is better seemingly. Thank you for your time. I will update this message again if there's an progress.
... View more
Nov 6 2018
7:35 PM
@NolanHerring. Here the result of RF Spectrum. Can you help me to explain about this? I haven't tried to remove the limit yet. I will try to replace the MR34 with other series for the first. I'm using firmware version 25.13.
... View more
Nov 6 2018
5:46 PM
@PhilipDAth I have also been applying that setting.
... View more
Nov 6 2018
1:30 AM
Maybe this is the right choice. But, I still have many users that use b/g/n wireless adapter.
... View more
Nov 5 2018
10:49 PM
Hello everyone, I have a problem with my MR34. I feel decreasing in connection quality. I give 6 Mbps for either upload or download. But, every I do the speed test, it needs a long time to get that speed. Maybe it needs 3-4 times to reach that traffic limit. After I opened the RF live monitor in the access point. It has high traffic and high interference. Even though, the connected client is only 6. What is the real problem? But, in the wireless monitor, there's no signal overlapping. What can I do to solve this problem? Please help me, thank you
... View more
Jan 30 2018
4:51 AM
On me, this problem doesn't only happen to my MR but also to the other devices which connected to my MS such as network printer, and D-Link switch. I use MR-16 & MR-12 with MS-22 & MS-42P. I have tried to change the cable as a sample, but I get the same result. My MR has up-to-date firmware version. So, do I need to try to upgrade the MR firmware to 25.8 or higher?
... View more
My Accepted Solutions
Subject | Views | Posted |
---|---|---|
4758 | Dec 11 2018 12:22 AM | |
6132 | Nov 7 2018 8:11 PM |