Meraki

Laukik · ‎Feb 17 2021

Hi @DouggieFresh ; How were you able to resolve this issue ? Thanks, L

Laukik · ‎Feb 17 2021

Hi Philip, Even i'm facing the same issue as @DouggieFresh. I'm connected to my home broadband and when I try to http://<Meraki_Public_IP>/#connection , I can retrieve Hostname, Network Name, Hardware address(MAC), model, etc Any help to overcome this vulnerability will be really helpful. Thanks, L

Laukik · ‎Feb 9 2021

On PC the users have Remote Viewer application installed which is connected via client VPN to PlayStation(connected in office). Due to that we are not able to view what kind of exact traffic is been sent. But I think the type of traffic which is been sent is control commands from PlayStation keyboard/Joystick to PlayStation console and audio-video for viewing the game and sound. Just for testing purpose, have added traffic shaping rule for PlayStation and Xbox LIVE with DSCP tagging = 10(AF11 - High Throughput, Latency Insensitive, Low Drop). I don't know whether this will work or not. If you have any other solution it will be appreciated. Another observation was, the CPU utilization used to spike to almost 100%(as per Meraki TAC). Hence for time being we have disabled AMP, but still this hasn't resolved our issue, nor the Meraki TAC is able to point out the exact issue even after several packet captures, iperf, disabling IDS/IPS and AMP, firmware upgrade to latest version(15.40 was latest that time) etc. Thanks, L

Laukik · ‎Feb 1 2021

Hi, We would like to create user who can add/delete JUST client VPN users. We won't need to give that user any other access on the dashboard. Is this possible ? If yes, how can I implement it ? Thank you in advance.

Laukik · ‎Jan 27 2021

Meraki MX has a public IP address. So when the user is connected to the VPN, 'what is my IP' will give MX's IP address. Thanks, L

Laukik · ‎Jan 6 2021

Hi, We have users' connected from Home PC to PlayStation via Client VPN and we are observing disconnection issue for them. At first, we suspected the issue was from user's ISP, but during our remote session with multiple users, we observed all of the user(if not all, most of then faced it. Like 60-70% users) were getting disconnected (game pop-ups with message 'Trying to connect 1/5'), at the same time. We tried to Whitelist the PS4 users along with VPN IPs were whitelisted, but still the issue persists. It was observed that the user's download and upload speed was above 250Mbps(on online speedtest), while on mx.meraki.com use to give 75+(75 being Meraki's limit). The actual speed required for this game is not more than 50-60Mbps. We have even upgrade the Firmware on MX250 to 15.40 version. With the help of TAC, we tried to run iperf(bandwidth testing tool) and the output was fine(verified by Meraki TAC). One more observation we came across was, we have same setup in different location with double bandwidth and triple users and the setup for both the location is same, but we are not facing any issue for other location. We are at the end of troubleshooting ideas and issue still persists. Any help from community will be appreciated. Thanks.

Laukik · ‎Nov 25 2020

Hi, We are looking for Cisco Meraki switch(s) where it supports 10Gb traffic speed on interface port(s) without the use of SFP/SFP+ modules, is there any such switch available ? Also does there exist 10Base-T (RJ45 cable) interface port(s) support on Meraki switch ? If yes, does meraki has such 10Base-T SFP ? If not, how can we support 10Gb speed between switch and Server ? If there is any solution, do let us know. Thanks in advance.

Meraki

Community

About Laukik

Laukik

Community Record

Badges

Re: WAN Failing PCI compliance - http on MX100

Re: WAN Failing PCI compliance - http on MX100

Re: Client VPN users connect to Play Station are getting disconnected

How to grant Meraki Dashboard user client VPN only

Re: Client VPN users connect to Play Station are getting disconnected

Client VPN users connect to Play Station are getting disconnected

Support for 10Gb interface switch support for Server