I see this FRP deactivation was supposed to go into effect in 2017.  However, I still have it happening.  The meraki command to change the passcode does not work on my android tablets and when I use recovery to factory reset, I'm still getting the google account or passcode lock during setup (even when using QR code setup for Meraki). I am also getting this FRP lock on devices I reset using the Erase device command in Meraki - I would say that is NOT disabled. ... View more

Just to clarify, are you using one Meraki user for all these phones or every phone has it's own Meraki user?   Have you enrolled to Android Enterprise in Meraki? ... View more

Well spotted. So now we have to decide if it matters or not. What scenarios can we imagine where we would want to access the location of an iOS device (via SM) without having to put the device into Lost Mode...? ... View more

We were enrolling devices in Device Owner Mode option A (When prompted for a Google account during device setup, enter afw#meraki. This will automatically install the SM app.) And we encountered this issue described here. We were unable to deploy any apps on the managed phones due to that.   After several attempts, we tried enrolling devices using Device Owner mode option B (In the device's setup wizard, tap the screen 6 times then scan this QR code. The SM app will be auto-installed and auto-enroll the device in the default Network.) and this worked for us.   The issue seems to be related to the version of Play services on newer phones. ... View more

Thank you Peter. ... View more

Hello All - I found a work around on newly enrolled. When assigning the tags do it from the search screen do not drill down into the device to add the tags. You will find the device name stays, take note though if you manipulate the device name or any other properties the owner name will go away and apps will be a problem again.     ... View more

@Uberseehandelwrote: I have just quickly checked where the control thinks I login from.   Taking 394 location values and using a great circle distance measurement calculation the error distribution is:   Kilometres      Frequency   0 -  10             65  11 -  60              1  61 - 110            321 111 - 160              1 161 - 210              0 211 - 260              2 261 - 310              1 310 - 360              3   So the error distribution is -   <   10 km -  16.5 % <  110 km -  81.5 % <  210 km -  82.0 % <  360 km - 100.0 %   The reasons for these large errors are probably caused by -   the ISP having to find dynamic IPv4 addresses where it can, rather than within their exchange based scheme Meraki not having access to the best available location information So IPv6 may come sooner than expected, even in fuddy-duddy UK.   It seems silly for Meraki to report that I accessed the controller from, say, Manchester, a city I have not visited for 20 years. Probably better not to report unreliable locations. 😎       Login info is generally gathered via IP so does as you say tend to be quite innacurate. Systems Manager client location however when gathered via GPS is normally accurate but the text above the map shows somethig out of date (sometimes from a few days orr weeks ago) ... View more

You will need to re-enroll using the afw#meraki option enter the new users credentials when you enroll?   I have been locked out by factory reset protection before but was unable to unlock it using the previous users personal Google account. Apparently since more recent systems manager versions factory reset protection has been disabled. https://community.meraki.com/t5/Endpoint-Management-Systems/Disable-factory-reset-protection/m-p/11128#M1378   Do you get the factory reset protection screen when you boot and try to set up the device?    ... View more

@JoshHwrote: @MerakiDavewrote: Give Meraki Support a call who should be able to see and correct any geo-enforcement issues based on your AP's config and order/purchase info. I had this issue, meraki support just told me to put it in its own network?! So I had some APs on the site in one network and one AP in its own separate network just to avoid this warning!    I'm not really happy with the solution there... Just try doing that in Israel - Meraki/Cisco shipments would be halted until the situation is properly resolved.   Meraki support need a pretty intensive briefing on this issue. ... View more

Glad all the kinks got worked out. ... View more