Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
- About PietervdB
PietervdB
Comes here often
Member since Mar 1, 2020
10-28-2020
Community Record
5
Posts
0
Kudos
0
Solutions
Badges
10-13-2020
05:23 AM
Hi Chad, How did the Air Marshall configuration keep up? I noticed I had already whitelisted the WiDi addresses before but to no avail. Cheers, Pieter
... View more
10-02-2020
06:57 AM
Hi Chad, I hope this fixed the problem for you. I remember when I was tinkering with the Meraki settings, sometimes it would just start to work again and held up for a couple days, I hope this is not the case with your setup. Thanks for the useful information regarding the Air Marshal setting, I will make sure to try that out and whitelist our Dell laptops' WiDi MAC addresses sometime next week. Will keep you posted! Have a great weekend, Pieter
... View more
10-02-2020
12:10 AM
Hi Chad, Unfortunately no, I did not find a proper way to get it working without disabling 5Ghz in the Meraki network. Also good to know you tried using widi adapters, my next step was to buy a bunch of Miracast dongles and see if that works. Guess not 🙂 I did however have a so called "AirServer" lying around which is basically an intel nuc which supports Miracast, Airplay and Chromecast. I've tested this with the 5G network on, and for the last few months it kept running smoothly and I was able to use the Windows 10 miracast function every time. I did open a case with Cisco back in februari but then Covid came along and I was not at the office when they reached out to me, and tbh i haven't put any more time in this. Should you happen to come across a working solution, please let me know! Kind regards, Pieter
... View more
03-02-2020
03:52 AM
Hi ww, Thanks for answering. Air Marshal found the Miracast devices,but we haven't set it up to do anything with rogue ap's so they just got marked as "uncontained". To make sure Air Marshall wasn't the problem I've whitelisted the Miracast devices. Again, same result, the Miracasts were not found until I switched off the 5 GHz band... Kind regards, Pieter
... View more
03-01-2020
11:52 PM
Hi All, We are experiencing a weird issue with our Samsung miracast enabled TV's and our Meraki setup. Tv's are undiscoverable until we Turn off the 5 Ghz radio of the nearby Meraki access points. Since Miracast uses P2P wifi I thought it had something to do the with Miracast 5Ghz channels used for discovery of the Miracast devices. This lead me to think the autochannel feature on Meraki was the culprit, so I disabled all but 2 channels on the nearby access points but to no avail. I also tinkered with a lot of other settings in the radio settings page of the Meraki dashboard but none of those options really made a difference. So for now we have turned off the 5 Ghz band so people can use the Miracast functionality straight from our Windows 10 machines but of course we would like to use the full radio spectrum available. I'm running out of ideas here. Do any of you have come accross the same issue? Kind regards, Pieter
... View more
