Renumber to 10.x.x.x /16 ranges 😉    Use the second octet for assinging the "location" As example 10.10.x.x/16 for the home and 10.20.x.x/16 for the garden office.   That way you can use the same vlan's on both sides with just a different second octet. Combining the 3rd octet with the vlan is smart, give you easy overview but using it with the 192.168 prefix limits your options when you want to expand.   This way i'm doing the designs of greenfield or renumbering setups to keep it flexible in the future. ... View more

All sorted thanks so much guys    It was the routing from the ISP router that was causing the errors ... View more

I don't know about pass-through mode. ... View more

I think these two are relatively popular: https://www.atlassian.com https://www.zendesk.com ... View more

Hi @Uberseechandel Thanks for the link this is the config I have previously tried but the MX doesn't seem to connect or initiate the PPPOE connection I can get the CD light to stay solid green but nothing els is going on I will try this again now and see if it works Thanks Anthony ... View more

I missed that out its in the post above lol around 15m max between the two AP's    2.4 is flooded but i am pretty sure i am the only 5ghz user in the close vicinity     ... View more