Hello,   We just opened up a new satellite campus and contracted for dedicated/private fiber service between the new campus and the old main one.  The fiber service can ONLY carry tagged VLAN traffic.     In the main campus we have the fiber service connected to an MS switch port set up as a Trunk. In the satellite campus we have the fiber service connected to an MS switch port set up as Trunk as well. When the satellite campus switch boots it can't establish a connection over the Native VLAN 1 and then proceeds to connect via VLAN 2 (which we also have set up at the main campus).  As a result, I get a warning in the Meraki console that the switch is not operating under the standard management VLAN which is the Native VLAN 1.   What is the best practice for setting things up given my constraint that I can only pass tagged traffic over the fiber connection?  Should I move all MS switches to another Management VLAN?   Related to this, we have MR wireless access points at the satellite campus that will also want to use Native VLAN 1 as their management VLAN.  Should those be set to a different VLAN for management as well?   Any advice would be helpful.   Thank you,   Erin ... View more