Hello, community, I have a little problem. I've got two MX67C's, one is HUB and the other is Spoke. Everything works perfectly, all networks are also visible in the VPN. Now the problem. On the Spoke MX I use the built-in LTE modem as backup line. LTE line is also connected. WAN1 status via cable shows active and LTE shows ready. Everything is working. But as soon as I simulate a failure of the WAN1, that I pull the cable out of the WAN1, the dashboard and the internet runs over LTE. But VPN remains disconnected, the VPN routes are shown as red and the VPN connection between the two MX is not established. When I plug the cable into WAN1 again, VPN is established and the VPN routes turn green. Why is VPN over LTE not established? The dashboard and internet over LTE is working. Here are the data from the MX: MX67C-WW Firmware 14.42 Thanks.
... View more