This is by far my biggest drawback with Meraki, otherwise I use these where I can.   I've learned to utilize the syslog functions (we use Rapid7.)  It would do so much for Meraki to be able to show a live monitor (like Palo, Fireppower and others...) With over 45 Meraki sites, it log fills up quick!     Not sure if it would ever be in the cards... But maybe, just maybe. lol   -my 2 cents. ... View more

Hey is it possible to NAT between 2 LAN connections?    Example, LAN1 10.1.1.0/24, LAN2 192.168.1.0/24.  Anything coming from LAN2 could be translated to 10.1.1.0/24.    Meraki Uplink-10.1.1.117/24 Source IP-10.1.1.167 Destination-10.1.1.118 Translated Source Address-192.168.1.253 Translated Destination Address-192.168.1.10     Sorry to revive an old post, I am trying to replace an old firewall with a Z3 or spare MX.  All this firewall does is NAT between 2 different networks like the example above.   Thanks! ... View more

I have MG21 on Verizon.  Works well. ... View more

Nolan,   Do you apply this to all your switches?  If I have Meraki AP's on several downstream switches, from our core switch, and I can see the MAC flap traverse all the way up.  Depending on If they roam from one building to another before the MAC address times out.   So I'm guessing you make this part of your default config for your switches?   Thanks, ... View more

I too have this issue, and I wish there was a better fix rather than ignoring or discriminating the logs.  Like others have said, its due to roaming and the MAC address aging time for clients.  I've engaged Meraki TAC and a few others.  The default aging time for Meraki switches is 10 seconds (according to TAC, which to me is crazy) and for Cisco its 300 seconds.  TAC and the others I've engaged say they have not seen this on MS switches....   I've experimented with lowering my switchport configs with Meraki AP's to 1 minute.  It helps, but doesn't 100% solve the issue.  I wish there was a better fix.  ... View more

On ISE, have you need to enable weak ciphers option in allowed protocols?  Otherwise a test from Meraki dashboard will not hit your ISE rules.     ... View more