Meraki

pbarbieri · ‎Dec 11 2020

It is absurd that Cisco is not able to remove this issue ... many time i have to open a ticket to ask to fix the problem in the backend... this solution is become unreliable. I have more than 7 meraki w64 hub and spoke architecture for a mission critical application and cisco do not release a firmware to remove it. Mainly this happens as soon as power go off and meraki start again without a warm reboot and i noted that in the previous firmware release this didnt happen.

pbarbieri · ‎Nov 16 2020

The same for me unable to fetch configuration. I had this problem four time in one month. They said that is needed a new release of firmware and the beta has. Imagine i use meraki for a mission critical application

pbarbieri · ‎Mar 11 2020

pbarbieri · ‎Sep 30 2019

Many thanks!

pbarbieri · ‎Sep 29 2019

Good morning, I have a network with several meraki MX64. I have enabled autovpn hub and spoke configuration between the nodes, with one hub and three spokes. in one meraki node one of these subnet (10.11.8.x/24) that take part to the auto-VPN tunnels have two static routes with subnet 10.11.3x/24 and 10.11.2.x/24 and 10.11.8.1 as gateway . I have configured the static routing enabling the VPN options for the subnet 10.11.3.x/24 and 10.11.2.x/24. My question is : if I have already enabled the VPN option for 10.11.8.x Do I have to set the VPN option also for the subnet 10.11.3x/24 and 10.11.2.x/24 that have a static routing with 10..11.8.1? What does It happen if I don't apply this option? Static routing Subnet Gateway 10.11.3.0/24 10.11.8.1 10.11.2.0/24 10.11.8.1 10.11.8.0/24 VPN enabled Thanks

Meraki

Community

About pbarbieri

pbarbieri

Community Record

Badges

Re: Unable to fetch configuration

Re: Unable to fetch configuration

Re: It’s that time of year again 🧹🧼🧽— share your spring cleaning picture...

Re: AUTO-VPN and static routes

AUTO-VPN and static routes

Re: It’s that time of year again 🧹🧼🧽— share your spring cleaning picture...

Re: AUTO-VPN and static routes