So...   In Meraki the API keys are connected to the user, the user has to be added in the dashboard to gain access. Inherently some form of access credentials must be combined with the user in the dashboard. It would seem that these credentials does not apply to the API requests that also follows the user. Am I correct in assuming the following:   Organization A adds user "Security@risk.biz" in their organization, add API credentials so that this user can use the API.   Organization B adds user "Security@risk.biz" in their organization, but limit the dashboard user to <read only> to limit  this user. They have already enabled API access for other users that are OK.   Now user "Security@risk.biz" can run POST/GET/LIST etc. commands through the API and have full control of Organization B's Meraki portal, allthough that was never the intention?  ... View more

Hi guys, wanted to check if someone had encountered the same problem as we have. Collectiong Syslog from local MX devices are easy, but when you have multiple orgz and multiple physical locations you would need to transport syslog over the internet. But we have the option to use the API to collect information into the SIEM tool, does anyone have experience with using the API module within Qradar and polling events from the API in Meraki? ... View more

So we have approx 90 Organizations, now I need to retrieve all NetworkID's   Have anyone done this with i.ex Postman and saved the response to a .csv/Json? I already have the collection so just looking for the correct "test" to save to file. ... View more

Anyone out there have done some updates to Postman environments. I'm looking into creating org with Postman, then pull the {id} from the response to update the {organizationId} in the environement and the run create network and pull {networkId} to update network settings.   has anyone an example test code for this, I'm struggeling to update the environment variable. ... View more

Earlier when i Cloned Orgz. in V0 of the API i also copied over the networks. This was quite handy as I had a "template" org with SAML set up, and a Template network with the correct webhooks and sensitivity setting  and alert params.   Now with the API v1 when i Clone I only get the org, not the template network. Anyone have some input as to an easy fix that does not include scripting all webhooks and params into a network deployement via API? ... View more

So we are looking to automate deployment from a form. But it seems there is no option i API v1 to create or clone networks?   V0 had the "post" option for new network, but this is now gone. Does anyone have an idea of this has been moved or called something else i V1.   An acceptable solution is of course clone or deploy from template if anyone have the correct approach for that. ... View more

So at the moment I have a trial with meraki for both MV32 and MV72. This to try the new sense license and integration to V-app.io   But it seems that both cameras behave exactly the same: The connect just fine and show up in the dashboard, then after a few minutes they disconnect and will not go online again until I reset them. After that it is just the same and they work and then go off line after a few minutes.   I have tried these in to different locations and on both a traditional 2960 legacy deployement and a full stack Meraki connected to the internet, apart from an MX there is no security appliance between the cloud and the stack either as internet is provided with a media converter from fiber and directly into the MX. ... View more

For a long time now I have testet Jumpcloud as a simple way of providing 802.1x auth. for smaller wireless that does not have AD/NPS available. I\m looking into this for a service aimed at Smaller businesses that still need policy based access to vlans etc. (and no the built in Meraki won't do)   But I have found the Jumpcloud service to be very unstable, and if clients are not connected for a while the network just seems to deny access after some time. There are other things also that does not work, but anyways. Does anyone else know of a free small scale cloud based LDAP service? like Jumpcloud? ... View more

I tested the Insigth a while back and found it a bit "premature" the numbers for application health was not accurate, and for some services it did not count at all. also there was not a lot of reporting going on.   Have anyone used it lately? and found it to be a useful tool/reporting metric say i.ex. for an MSP 😉 ... View more

OK, so we are setting up a new WAN connection, we are in stages to exchange the old legacy infrastructure to Meraki MS210's   The thing is that for a period of time we need to trunk all Vlans from the legacy infrastructure over to one MS210, and this is OK. But before going live we need to establish and verify that the link between the new and old infrastructure is OK and connected on the correct ports. We do not have access to all sites as there are several and we rely on IMAC techs to install and patch the equpment.   The problem is that if we open up the port to the new infrastructure it will announce the new gateway as well to the old and traffic will be impacted. Off course we can disable the port and run a cable test to ensure that patching is done, but I wonder if we somehow could leave the port active but use port isolation and prevent announcing of a new gateway yet still get information from the discovery protocol on serial and mac of the connected old infrastructure. ... View more

Just fooling around with my home network, and looking into if it is possible to assign varius devices to various vlans based on MAC adress by the use of only Merak and Meraki SM, anyone have any tips?   A second option is to assign access to vlans based on SSID, but what is the preferred way to assign access when the client needs to access say a vlan providing internet, a vlan providing TV services/apple TV/android/chromecast.   For Apple maybe Bonjour broadcast?   You migth say that this is not needed for home deployment, but I´m experimenting because alot of techs say that you need ISE, Clearpass etc. Alongside to provide the sec. And features needed in an ent. Environment, but would it be possible with Meraki only to provide a secure SMB network  ... View more