Meraki

Ahmad_Qattan · ‎Jun 25 2020

Hi, i wounder if there is a way to connect an iPhone device as a client vpn for MX device, and apply the Split Tunnel. so that any traffic for the destination LAN are tunneled, but other traffic like internet is sent directly. i found an article for the Split Tunnel. but it describe the process for Windows and Mac OS. no info for iPhone IOS or Android. can anyone help, please. https://documentation.meraki.com/MX/Client_VPN/Configuring_Split_Tunnel_Client_VPN

Ahmad_Qattan · ‎Nov 16 2019

Hi, I am subscribing for the RSS Feed for this one. may you please update this topic when the feature is out and configurable. it is a long waited feature. regards, Ahmad Qattan

Ahmad_Qattan · ‎Sep 30 2019

Hi, I am having an issue where i am managing a network using Meraki switches, and having a Vlan for the IP Cameras, and a separate Vlan for IP Telephony, etc... the point is that from time to time, i find some cameras connected to the staff Vlan without a prior notification from the Camera guys. and they worked around the Vlan assignment by configuring the NVR with an interface to the default staff Vlan but with an IP address of the CAM Vlan. i am thinking if i can configure the Meraki switches with auto Vlan assignment for the ports based on the MAC Addresses. is this doable? regards,

Ahmad_Qattan · ‎Mar 29 2018

Hi, as much as i understood from this article earlier, and my working on MX since i had an answer. it will not work. To have a L3 Switch with Vlan interfaces configured on, and to have the MX unit after this switch. this setting will lead you to the problem of having to configure the clients manually to the desired group you need these clients to be a member of. if you have the same scenario that i had earlier. that i had a guests vlan, and wanted to make sure that the any one connected to the Guests vlan to automatically been assigned to the Guests group. then i removed the VLAN interface from the L3 switch and passed the Guests VLAN to the MX -after i created the same VLAN on the MX Unit- and configured the VLAN interface on the MX unit. also applied DHCP from MX to this VLAN. then it was solved. so the Staff VLANs were kept on the L3 switch, and the Guests VLAN interface was moved to the MX unit rather that the L3 Switch. Kind Regards

Ahmad_Qattan · ‎Nov 8 2017

Hi Philip, loud and clear. many thanks

Ahmad_Qattan · ‎Nov 7 2017

Hi Philip, thanks for the reply, what about i connect the server's switch to a Internet Port, but with transparent mode. not nating mode. will this be any good. thanks

Ahmad_Qattan · ‎Nov 7 2017

Hi, I've an MX 84 and it is working fine as configured. i am thinking of getting benefit of "Advanced Malware Protection (AMP)" and "Intrusion detection and prevention" features available on MX. i am thinking of getting my servers on a separate non-meraki switch, and to connect an uplink from this switch to any LAN port on the MX unit. and another uplink to the LAN non-meraki switches. will this setting trigger any intrusion attack from my LAN to the servers? Thanks

Ahmad_Qattan · ‎Nov 7 2017

Hi, i wonder if there is anyway that i can apply a group policy on MX unit (Network-wide-->Group policies) to an IP Range, or a whole subnet -if i have a layer 3 network. because what i am doing is to create a new group policy and wait for the desired clients to be shown on the (Network-wide-->Clients), then i reclassify the clients on the desired group policy. is this the only way to apply group policies, or i am missing a simpler way to do this task. thanks

Meraki

Community

About Ahmad_Qattan

Ahmad_Qattan

Community Record

Badges

VPN Split tunnel on iPhone IOS

Re: Enhanced Firewall Rules for MX

MAC address Based VLAN

Re: Configure "Group policies" with IP blocks on MX

Re: Protecting servers group with MX unit

Re: Protecting servers group with MX unit

Protecting servers group with MX unit

Configure "Group policies" with IP blocks on MX

Configure "Group policies" with IP blocks on MX