Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About AugieV
Community Record
16
Posts
4
Kudos
0
Solutions
Badges
Hi Brandon Thanks for the reply finally figured it out with the help of Tech support. It looks like the Client Balancing feature was moving the clients to another AP while they were air playing. Turned it off and it solved the issue
... View more
Sep 3 2021
5:54 AM
This is the error that I see from client Unexpectedly disassociated, but the client had a successful connection to SSID BJPWLAN for 2 minutes on AP G214. CHANNEL 48 BAND 5 GHz SNR 61 dB TIME TO CONNECT 1550 ms 802.11 REASON (CODE 34) Missing Acknowledgements
... View more
Not sure if I can do that to apple IPads but I will look in our MDM. Thanks
... View more
We use Apple IPads 6th and 7th Generation but it does not discriminate it just will drop all 30 connections at once and move to the nearest AP. If I see an Mr-56 with 0 clients and I reboot the AP it will reconnect all the clients, Otherwise, it will start to slowly reconnect the Clients. It is not client or SSID specific but they are mostly apple products Macbooks, Ipads, Apple Tv's.
... View more
Switching the Mr-56 for an Mr-42 did the trick its been working without an issue for 3 days. Any Ideas
... View more
Thanks, Bgammon No its not a dhcp issue I do not have 802.11r or K enabled also its not SSID dependant I don't think its a dfs event I have 134 AP's and I have not seen any dfs events and I have set it on auto-select and it does not change channels very often.
... View more
Hi Phillip I will be swapping the Mr-56 for an Mr-42 this afternoon lets see what happens
... View more
Hi CMR 1. Firmware 27.6 2. It is not SSID Specific we actually use all 3 3. PSK authentication 4. Nothing that would suggest interference. I do get a lot of 802.11 disassociation unknown reason even though the client has not moved.
... View more
I have a classroom with a Mr-56 AP that is dropping all clients (about 30) after 20 to40 minutes or so. All those clients will then attach themselves to an Mr-42 in the class next door so it is now serving around 55 clients which slows down those clients. If I don't do anything the clients will start to come back to MR-56 slowly. If I reboot the Mr-56 they connect right away. Steps that I have tried I have swapped out the Mr-56 same issue. Swapped ports, swapped patch cables same issue Ran a new Cable to a different switch same issue. Any comments or ideas would be gladly accepted Next Step is to put a different model AP in that room.
... View more
Oct 17 2019
10:02 AM
Has anybody gone to the per-device license model not sure if it is available yet? I would like to get away from coterm
... View more
We are having an issue with a couple of Mr-34 that were working fine before we upgraded to the latest firmware but now any clients who connect to these AP's have a really slow connection.
... View more
Dec 5 2017
10:21 AM
Thanks I tried that but I still can't connect this client, I went as far as reimaging the client but still will not go on the internet it will bring up the my.meraki.com page. I have a case open with Tech Support lets see what happens
... View more
Nov 29 2017
11:12 AM
I have a Wireless Client Windows 7 that is getting an Ip Address from a different VLAN than the SSID is supposed to be attached to. It is the only client that this is happening to
... View more
Nov 7 2017
7:39 AM
1 Kudo
Hello Everyone My name is Augusto Venegas I am the IT Administrator at a private High School in Miami Florida. We have been using Meraki AP's for 6 years and recently upgraded our switches to Meraki. Looking forward to contributing.
... View more
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 3 | 2064 | |
| 1 | 88937 |
© 2025 Cisco Systems, Inc.
