Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Spaztibator
Spaztibator
Here to help
Member since Nov 4, 2017
Jan 8 2019
Community Record
11
Posts
2
Kudos
1
Solution
Badges
Dec 5 2017
8:05 AM
Thanks. Are you using CoA with ForeScout? Do you have the span port going to ForeScout? Are you using an agent? Sorry for the tons of questions. If you don't want to put this all out in the forums, you can send me a PM. Chris
... View more
Nov 27 2017
8:47 AM
Adam, We are doing so much more with Cisco ISE now. For non standard devices, we are using MAC authentication and profiling. Management wants to move to Forescout, so I am wondering if anybody has used Meraki and Forescout.
... View more
Nov 27 2017
6:47 AM
We currently have Cisco ISE, but are looking at Forescout for 802.1x Authentication. Does anybody have any experience with this? Thanks, Chris
... View more
Nov 8 2017
7:12 PM
There is 600 Sites. I can't double the routing table by adding a management subnet. There is already going to be a heap of automation and scripting. In the end, all a person will do is put in the ADP Site code and serial numbers, and everything else will be automated. Scripts will create the network using the ADP Code, name the devices, reach out to IPAM to find subnet located with ADP Code and configure the devices for the LAN IP info. It will also reach out to TEMS to get WAN IP address info and try to apply it to the device. From there, it will also reach out to ISE to add the devices that are needed. We are going to be adding cameras, so I will need to add them to ISE as well for MAB. We will have 12 months to get this all done for 600+ sites. I will have entry level provisioning engineers doing most of the work, and by the end of Q1, I will have to shift back to DC work with firewalls while the other guys continue running with this.
... View more
Nov 6 2017
8:03 AM
WANKiller, that is what I was afraid of. I think I am going to have to call out to my DHCP server to find out the subnet for that site off a common tag in both IPAM and Meraki. Then I will take the MAC address from adding the device in Meraki to go back out to Bluecat IPAM/DHCP to set a reservation.
... View more
Nov 5 2017
3:45 PM
There will be a mix of devices. Some switches, some APs. And since we aren't going to be a 100% Meraki Shop, we still need to make sure there is a difference.
... View more
Nov 5 2017
3:38 PM
1 Kudo
Except if you are using ISE for dot1x authentication. If the IP address changes, then the RADIUS messages will be rejected.
... View more
Nov 5 2017
3:31 PM
Management IP address
... View more
Nov 5 2017
3:30 PM
Management only.
... View more
Nov 5 2017
12:05 PM
1 Kudo
Hey guys. I am writing a provisioning script to do everything I need for switches and AP. Is there an API call to set the IP address info for a switch? Type IP VLAN Subnet Mask Gateway Primary DNS Secondary DNS
... View more
Labels:
- Labels:
-
Dashboard API
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 13836 | Nov 6 2017 8:03 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 1 | 13030 | |
| 1 | 13051 |
© 2024 Cisco Systems, Inc.
