This feature works only on APs unfortunately :(. On MSs is still work in progress.   ... View more

NAT mode: Use Meraki DHCP Clients receive IP addresses in an isolated 10.0.0.0/8 network. Clients cannot communicate with each other, but they may communicate with devices on the wired LAN if the SSID firewall settings permit.     Choose the SSID in the Firewall settings and do the following: Block IPs and ports Layer 2 LAN isolation           Disabled          Enabled          (bridge mode only)   Layer 3 firewall rules  # Policy Protocol Destination Port Comment Actions   Deny Any Local LAN Any Wireless clients accessing LAN       Argh, Brecht was faster, haha ... View more