I still have not heard back from Meraki. Fortunately we also have Umbrella (also uses Talos) so for now we are able to disable "Category Blocking" in Meraki and use it for content filtering instead.   Everything is working great this way but it doesn't solve the issue for anyone that doesn't have another content filtering solution setup.   ... View more

Thanks that part I knew.  We were hoping to leverage the other SFP ports to run fiber out of to connect the other switches because of distance.   So my thought was that it had to come in optical to the switch to be able to feed optical out to the other switches.  Is that a no - go? ... View more

Hi All,   I would like to see if this works for my current environment.   Our uplink is a fiber access port ran from an ms225 to an mx84 tagged with vlan80. The fiber run plugs in to port 11 via SFP, this port is assigned as an access port tagged with vlan80.    So do I need to assign vlan 80 to both the sfp port 11 and baset port as access ports?   Or do I bring in vlan 80 as a trunk port on 11 then set up the baset port that connects to wan1 as an access port?   Any assistance is appreciated.   Update: I was able to figure this out & it does work, thanks for the solution.   ... View more