Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Granthanimal
Granthanimal
Comes here often
Member since Jun 19, 2019
Apr 24 2023
Community Record
5
Posts
0
Kudos
0
Solutions
Badges
Mar 30 2023
8:23 AM
I still have not heard back from Meraki. Fortunately we also have Umbrella (also uses Talos) so for now we are able to disable "Category Blocking" in Meraki and use it for content filtering instead. Everything is working great this way but it doesn't solve the issue for anyone that doesn't have another content filtering solution setup.
... View more
Mar 28 2023
10:02 AM
Well I tested this out, After removing all category blocking, sites are accessed with no issue. I ran this way for about an hour and things worked great but obviously this is not an ideal state. I re-added all categories that were removed in Category Blocking and everything began running slow again.
... View more
Mar 27 2023
2:41 PM
Hello, On our MX250s we are experiencing issues with significant slowness accessing websites, especially new ones, from our network after upgrading to MX18.106. We upgraded in order from 16.16.9 -> 17.10.2 -> 18.106 Previously we had tried updating to MX17.10.2 and had the same trouble, so we reverted back to MX16.16.9 (the last version we did not experience this issue on) and we had to turn off scanning for "full sites" in content filtering and choose "Top Sites" instead. This feature is gone since Meraki switched to Talos for content filtering and I am at a loss on what to do about it. I have an open case with Meraki for this issue but have not been able to get anywhere yet. Web Cache is already disabled in our SD Wan settings. I have not tried rebooting them since shortly after the upgrade but I did do that to test HA. Any help is greatly appreciated.
... View more
Jun 20 2019
8:55 AM
Hi, I would like to see if this works for my current environment. Our uplink is a fiber access port ran from an ms225 to an mx84 tagged with vlan80. The fiber run plugs in to port 11 via SFP, this port is assigned as an access port tagged with vlan80. So do I need to assign vlan 80 to both the sfp port 11 and baset port as access ports? Or do I bring in vlan 80 as a trunk port on 11 then set up the baset port that connects to wan1 as an access port? Any assistance is appreciated. Update: I was able to figure this out & it does work, thanks for the solution.
... View more
Jun 19 2019
2:23 PM
Hi All, I would like to see if this works for my current environment. Our uplink is a fiber access port ran from an ms225 to an mx84 tagged with vlan80. The fiber run plugs in to port 11 via SFP, this port is assigned as an access port tagged with vlan80. So do I need to assign vlan 80 to both the sfp port 11 and baset port as access ports? Or do I bring in vlan 80 as a trunk port on 11 then set up the baset port that connects to wan1 as an access port? Any assistance is appreciated. Update: I was able to figure this out & it does work, thanks for the solution.
... View more
© 2024 Cisco Systems, Inc.
