I have a Meraki MS250-24 Edge switch that I want to configure as the Gateway for 2 vlans... Enable Layer 3 routing Port 1 of the MS250-24 will be the Uplink trunk port for both Vlans to the ISP Router (10.1.1.2) & (10.2.1.2) with Cloud Firewall Services, plus Static Routes for a MPLS Point to Point to another site for Vlan1 Data & Vlan2 VOIP Traffic... Interface for Vlan1 as the gateway interface for the Class C subnet 10.1.1.0/24 Gateway 10.1.1.1 (Data) Interface for Vlan2 as the gateway interface for the Class C subnet 10.2.1.0/24 Gateway 10.2.1.1 (VOIP) Ports 2-27 will be trunk ports All vlans Port 28 will be the downstream to the rest of the Van's trunk subnet's switches Does this configuration look correct? It will be a Meraki MS250-24 duplicate edge switch on the other point to point site. The concept is to replace the legacy Juniper on-prem Firewall/Layer 3 router/Gateway edge device with just the Meraki MS250-24 Layer 3 switch edge/gateway with uplink to an IPS managed router to Cloud Firewall Services & MPLS Site to Site VPN traffic. Static route to other site might be on this switch or on the ISP router. Site A Data Vlan1 10.1.1.0/24 to Site B Data Vlan1 10.1.0.0/24 Site A Voip Vlan2 10.2.1.0/24 to Site B Voip Vlan2 10.2.0.0/24
... View more
digital transformation means an attempt to redesign a perfectly functional high performance wheel to take advantage of some new digital capability but until Revision 5 or more is reached understanding the wheel will still be a bit square shaped and give us a rougher ride until it is re-refined correctly. Whereas a new digital wireless camera feature will be added and the new wheel will becomes a bit square again.
... View more