We got this too, I'm hoping it's a bad joke as that would leave UK sites with a grand total of 4 non-DFS 5ghz channels. Ironically Meraki only managed to get unii-3 channels working in the UK in 29.1 via an undocumented driver update so to now take it away again would make them seem a bit cowboy. ... View more

Hi,   I'm not sure exactly which bot the documentation was referring to but have you checked Meraki's GitHub? I found a couple there that might be of interest to you:   spark-operations-bot and spark-bot   Kind regards,   Dave ... View more

This is a client in a network of 29 clients (last 24 hours) with 8 WAPs compared to the original network I was testing which had 559 clients and 50 WAPs.   $ curl -X PUT https://n177.meraki.com/api/v0/networks/N_XXX592095176884YYY/clients/c4:61:8b:61:e4:9c/splashAuthorizationStatus -H 'Cache-Control: no-cache' -H 'Content-Type: application/json' -H 'Postman-Token: a7742d3b-233d-5e6c-6fa9-3c01d3fddb62' -H 'X-Cisco-Meraki-API-Key: XXXYYYZZZ' -d '{ "ssids": {"1": {"isAuthorized": "true"}, "2": {"isAuthorized": "true"} } }' -w "\n Time Total: %{time_total}\n" {"ssids":{"1":{"isAuthorized":true,"authorizedAt":"2018-03-20 10:12:47 UTC","expiresAt":"2018-03-27 10:12:47 UTC"},"2":{"isAuthorized":true,"authorizedAt":"2018-03-20 10:12:50 UTC","expiresAt":"2018-03-27 10:12:50 UTC"}}} Time Total: 7.164 (I tested again and got 6.400 seconds).   So the time is just less than half for this smaller network, if network size definitely has something to do with it then the next step would be to determine if its number of WAPs or number of clients that is effecting it. Usually more WAPs = more clients, I think I'd have to wait until a weekend to have the same number of WAPs but less clients to test that theory.   Dave ... View more

Hi, thanks for following up, your results are interesting and I replicated the tests:     $ curl -X PUT \ > https://n177.meraki.com/api/v0/networks/N_XXX592095176884YYY/clients/b4:f1:da:b3:23:9c/splashAuthorizationStatus \ > -H 'Cache-Control: no-cache' \ > -H 'Content-Type: application/json' \ > -H 'Postman-Token: 0f880d94-fd45-bfc5-96b9-ea710625fd10' \ > -H 'X-Cisco-Meraki-API-Key: XXXYYYZZZ' \ > -d '{ > "ssids": > {"1": > {"isAuthorized": "false"}, > "2": > {"isAuthorized": "false"} > } > }' \ > -w "\n Time Total: %{time_total}\n" {"ssids":{"1":{"isAuthorized":false},"2":{"isAuthorized":false}}} Time Total: 1.272 $ curl -X PUT https://n177.meraki.com/api/v0/networks/N_XXX592095176884YYY/clients/b4:f1:da:b3:23:9c/splashAuthorizationStatus -H 'Cache-Control: no-cache' -H 'Content-Type: application/json' -H 'Postman-Token: 0f880d94-fd45-bfc5-96b9-ea710625fd10' -H 'X-Cisco-Meraki-API-Key: XXXYYYZZZ' -d '{ "ssids": {"1": {"isAuthorized": "true"}, "2": {"isAuthorized": "true"} } }' \ > -w "\n Time Total: %{time_total}\n" {"ssids":{"1":{"isAuthorized":true,"authorizedAt":"2018-03-19 11:54:52 UTC","expiresAt":"2018-03-26 11:54:52 UTC"},"2":{"isAuthorized":true,"authorizedAt":"2018-03-19 11:55:06 UTC","expiresAt":"2018-03-26 11:55:06 UTC"}}} Time Total: 29.615 So I thought maybe its because I'm trying to authorize two SSIDs at once but even with one I get the same results:   $ curl -X PUT https://n177.meraki.com/api/v0/networks/N_XXX592095176884YYY/clients/b4:f1:da:b3:23:9c/splashAuthorizationStatus -H 'Cache-Control: no-cache' -H 'Content-Type: application/json' -H 'Postman-Token: 0f880d94-fd45-bfc5-96b9-ea710625fd10' -H 'X-Cisco-Meraki-API-Key: XXXYYYZZZ' -d '{ "ssids": {"1": {"isAuthorized": "true"} } }' -w "\n Time Total: %{time_total}\n" {"ssids":{"1":{"isAuthorized":true,"authorizedAt":"2018-03-19 12:06:14 UTC","expiresAt":"2018-03-26 12:06:14 UTC"},"2":{"isAuthorized":true,"authorizedAt":"2018-03-19 11:55:06 UTC","expiresAt":"2018-03-26 11:55:06 UTC"}}} Time Total: 15.855 $ curl -X PUT https://n177.meraki.com/api/v0/networks/N_XXX592095176884YYY/clients/b4:f1:da:b3:23:9c/splashAuthorizationStatus -H 'Cache-Control: no-cache' -H 'Content-Type: application/json' -H 'Postman-Token: 0f880d94-fd45-bfc5-96b9-ea710625fd10' -H 'X-Cisco-Meraki-API-Key: XXXYYYZZZ' -d '{ "ssids": {"2": {"isAuthorized": "true"} } }' -w "\n Time Total: %{time_total}\n" {"ssids":{"1":{"isAuthorized":true,"authorizedAt":"2018-03-19 12:06:14 UTC","expiresAt":"2018-03-26 12:06:14 UTC"},"2":{"isAuthorized":true,"authorizedAt":"2018-03-19 12:06:42 UTC","expiresAt":"2018-03-26 12:06:42 UTC"}}} Time Total: 15.655 Maybe its something to do with size of network/number of clients?   Thanks, Dave   ... View more

Thanks for this, it looks like you're following the same process of searching networks then devices and finally clients. Maybe that is the only option so I'll have to look at storing the data and refreshing periodically. I might also try setting the timestamp to 8 hours instead of 24 to speed things up.   Kind regards,   Dave ... View more

Hi, Possibly yes but all of the APs on this site were showing as low power mode: and as soon as I entered that command they all showed as 802.3at:     Interestingly we have other sites with 3850's that we haven't entered this command on. Only differences I can see are this: Model Number Hardware Version Software Version Needed 2-event? WS-C3850-48P V04 3.03.05SE NO WS-C3850-48P V07 3.07.05E YES So next step would be to upgrade the V04 site to 3.07.05e to see if that changes anything but I haven't got spare time at the moment. Anyway, whatever the cause, just wanted to share to save people time if it happens to them.   Dave ... View more