5 years later, is there anything yet that Meraki will send out to partners? Or is there a third party vendor who created these already?   ... View more

After further discovery, The L4-L7 integration in ACI functions much like many 'API type' GUI interface for firewall management. A familiar example for everyone would be ASDM in ASA management. However, the ACI integration is not as effective as using ASDM, which lacks even some control only available via CLI. Short story, the package does not exist because it is unnecessary and would be less effective than the existing Cloud Management or API Dashboard that is already available. Hopefully this saves someone else the time it took to understand the relationship. Thanks to all with their insights! Don ... View more

So close, yet so far, n184 still having issues with in particular photos on the location tab, you can access it but you have to refresh the page after it initially fails to load each time. ... View more

The above statement is correct. While device ownership can be transferred between end customers, licensing can not. See the following link from meraki documentation explaining the guidelines regarding this. https://documentation.meraki.com/zGeneral_Administration/Inventory_and_Devices/Cisco_Meraki_Devices_purchased_Second_Hand ... View more

Hi EJN,   For that kind of discussion we would ask that you engage your account representative here at meraki. They have the most visibility when it comes to the roadmap and planned features. You can find your account reps information from your meraki dashboard in the "help" > "get help" section towards the bottom of the page. ... View more

Hi PeterJames,   I spoke with some of our SM experts here at meraki and wanted to share some important information. Firstly, that the iOS app should never get minimized while in single app mode. If you see this happening there may be an issue with the mode along with other components. Additionally, there is no way for meraki systems manager to run the clean up utility mentioned. If you are seeing this behavior please reach out to meraki support (support@meraki.net) for more in-depth troubleshooting and diagnosis. ... View more

Hi nst1,   You may be running into an instance of a missing return route back to the new interfaces on the MS350 from the other routers. The best way to troubleshoot would be to gather packet captures from the switch ports as the ping/traffic is attempting to pass. With the captures you should be able to track where the 350 is sending the traffic and follow it through the rest of your network. If you require any assistance please do not hesitate to open a case with our support team by contacting support@meraki.net ... View more

Hi CiscoUser,   I will attempt to address your questions below:   In regards to the 1st question. Currently, the API call you referenced is the correct API for port information. At the moment there are no alternatives.   as for the 2nd, there are currently no API calls that will provide the in/out octet count in the manner an SNMP get would provide.   Our API systems are always growing, we recommend that any feature requests for additional API functionality be submitted through the "make a wish" window located on the bottom right corner of any dashboard page. ... View more

If someone think in this solution, configure BVI on router, discard because i realize some tests today and work. meraki dont understand how LAN in your interfaces. ... View more