I'm guessing EE have got IPv6 to IPv4 working properly then, which is good 👍 ... View more

I had the same issue with a Meraki MX64 today. I deauthorized and reauthorized the user from the dashboard and my problem was solved. I hope this helps. ... View more

For me once it disconnects it can't re-associate without hours of rebooting both the Meraki and the Camera multiple times. ... View more

Good news , I received today the replacement . :-)))   Hope that they are not defective, I will install when I can. We close the premises due to COVID-19.   I had to fight hard and after 30 emails to the support they finally push the right button.     ... View more

As long as you're referring to devices that are able to handle cert based authentication. But in each and every network, there's more than that.   Unfortunately, many Windows admins don't see that and that's one of the main reasons NPS sucks bug time... ... View more

+2 for higher DH groups now.   I'd also kill for a higher client VPN setting. Support can bump you to AES-128/DH14, but it is still not great! ... View more

I have just tested this with a Z1 and confirmed at the minimum it could hand out 500 leases over 4x /25 subnets @Patrickpu wrote: How did you run 100-200 computers off of 1 Z1?  These things have a cap of IPs that they can utilize...right?  I believe they can only run a /29.     ... View more

@Matt-Ignite wrote: These look really good!   As someone who's had no end of trouble trying to get a USB modem working with the MX64 devices (and ended up giving up because it just won't work here), having an integrated LTE modem is a real benefit.    The downside is obviously the cost - the MX67C is twice the price of the MX64 by the looks of things. I'd pay a bit more for integrated LTE, but an extra $1000 is a tough sell to a customer when a USB dongle is only $50.   On the official Documentation page for the new devices (https://documentation.meraki.com/MX/MX_Overviews_and_Specifications/MX67_and_MX68_Overview_and_Specifications), there's mention of being able to set a custom APN via the dashboard UI. I don't support there's any chance of getting this added to the MX64 devices as well? That would be a huge help when dealing with 4G failover.   Cheers, Matt The MX67C in addition to having integrated LTE also has 2x firewall throughput so additional cost is reasonably justified. If still too steep for you/your customer have you tried the Inseego Skyus LTE device? It is "Meraki Certified" and the only device we deploy now because they have been rock solid for our clients that have purchased them. ... View more

Hello RyanB   Is this new sizing guide published now?   Regards,   Oskar ... View more

>The thing is that they want us to install beta in production environment.   Stable .... but not working properly.  Go for the beta software, you don't have much to loose and something to gain. ... View more

Any future plans to support guest vlan with multi auth? It has been a few years since removing our last procurve but as I recall, guest vlan still worked if the only client on a port was unauthenticated. If an authenticated device was already on the port, then the unauth device was blocked. ... View more

I used the staged upgrades feature today.  The switches rebooted about 7 minutes after the stated upgrade time.   I still don't like the dashboard showing that the upgrade has completed even though the switches are still downloading the code. ... View more

I had to remove the power cable, after an minute replugging. And the switch was starting and working well. ... View more

Hi BHC_RESORTS,   How do you enable adaptive 802.11r?   Thanks! ~Doug ... View more

@Bovie2K Agreed.   Agreed.   E.g. 1 year for 1 Device > Add 2 Devices > 0.5 Years for 2 devices. And 1 years for 2 devices > Remove 1 Device > 2 Years for 1 Device. ... View more