the status can be displayed on the MS Switch. not at the MR Access Point ... View more

update from meraki case team:   "The issue you are experiencing with your MR33 is a documented issue that our engineers are currently taking a look at."   ... View more

do you use the access point in NAT mode? if your smart home is connected to a wired network and you are trying to access via wifi, there will be no connection because the access point is setting up a separate DHCP. To fix this, you can enable Bridge Mode or create a firewall rule. the bridge mode can be found under wireless / Access control /addressing and traffic ... View more

I took an MR32 from another network and this one didn't generate crosstalks. ... View more

the port configuration is the following:   Description Trunk port using native VLAN 1; allowed VLANs: all Tags none PoE Enabled Link negotiation Auto negotiate (1 Gbps) RSTP Forwarding Port schedule Unscheduled Isolation Disabled Port mirroring Not mirroring traffic   I have already tried all ports ... View more