I'm struggling with the configuration of my Traffic-Shaping and therefore I need some assistance.   Issue:   We have a 70Mbps internet connection. We also have some important department for which we want the network traffic to always have high priority on the network. We therefore want to create 2 group-policy and assign the important network traffic High and the other network traffic Normal priority. This mean High will have 50Mbps en Normal will have 20Mbps.   This is the part I don't understand very well.   Does this mean that in my example here above, the 50Mbss always will be seen as a reserved bandwidth for the High priority and will never be available for the Normal priority, even in s situation where there are no High priority network traffic. And the Normal priority never will get more than 20Mbps of the bandwidth even if the rest of the bandwidth is unused by the High priority. ... View more

Hi all,   Still trying to run my first Python SDK API command, bou until now without sueccess. I'm confortable with postman Rest IP, but my focus is to make the shift  to Python.   Please find below the error message I received while trying to run the SDK python script.   Any help is really welcome   Regrards,.   Bayet, ... View more

Hello,   I'm trying ti use Python SDK for Meraki configuration, but untill now without success. My Python configuration is done as the instruction in this link " https://github.com/meraki/meraki-python-sdk#admins_controller ". My IDE is Visual Code Studio.   I also successfull tested the installation after the installation as:   E:\Python\Python37\meraki-python-sdk-master>nosetests ---------------------------------------------------------------------- Ran 0 tests in 0.141s OK   All four folders have python file, but can some explain to me where to start, which python file in which folder should I use. ( see screenshot) I'm not a programmer, but I want to learn how to use those python API files. I also went  through lots of Meraki document without success.   Thank you.   ... View more

Hello,   Is there a way to bypass the organization " Idle timeout " settings for the service desk user account used to project the Meraki dashbord on an big Screen for monitoring purposes.   Thanks,   Antoin ... View more

Currently we have a DMZ configure on a Pf Sense Firewall and I'm trying to find a way to move the DMZ configurations from the Pf Sense to Meraki MX100.   Current configuration:  Up-link to ISP = x.x.236.4/30  ( Public IP address ) DMZ subnet = x.x.236.160/28 ( Public IP address ) DMZ servers do have public IP addresses assign and using NAT to translate those public server IP to private IP address on the internal servers. On the MX100 in NAT mode I don't see how to configure and get the same result as on the Pf Sense.   The way forward I think is to remove the /30 up-link to ISP subnet and configure the /28 between the ISP and the external MX WAN interface. 1:1 NAT can be use to send traffic from internet to the internal server.   Does anyone has another approach how to solve this issue.   Thank you. ... View more