Meraki

ShawnD · ‎Oct 30 2019

Did anyone ever come to a resolution on USB modems? Currently trying to get one of these Inseego / Feeny modems to work without much luck.

ShawnD · ‎May 10 2019

From Technical Support: The MX WAN ports do have specific MAC address, which are useful to note if troubleshooting upstream of the device; however, the LAN ports are not treated in the same fashion. Any traffic coming from the MX through those ports will show up as the MX MAC address to devices downstream. Please let me know if you have any other questions!

ShawnD · ‎May 10 2019

Does anyone know of a way to find the MAC address assigned to the individual ports on a Meraki Z1 or Z3 device? There is this document on how to calculate the Internet / WAN port MAC address here: https://documentation.meraki.com/MX/Other_Topics/Calculating_MX_WAN_MAC_Addresses But have been unsuccessful in finding this information for the LAN ports.

ShawnD · ‎Apr 16 2019

“EGG FOUND!”

ShawnD · ‎Jan 28 2019

So far looking good. This guide here is pretty helpful as well: https://documentation.meraki.com/MX/Deployment_Guides/VPN_Concentrator_Deployment_Guide#Deploying_a_One-Armed_Concentrator

ShawnD · ‎Jan 28 2019

I'll give at go and report back.

ShawnD · ‎Jan 28 2019

Very little traffic runs over this link so the through put should be fine. We have them in similar environments servicing 20 workstations as a dedicated link for this traffic.

ShawnD · ‎Jan 28 2019

Is it possible setup the Z1 on stick? I'd like to replace an ASA with a Z1, the ASA is currently setup with just a single Ethernet connection.

Meraki

Community

About ShawnD

ShawnD

Community Record

Badges

Re: Z1 (or Z3) and USB Cellular Modems

Re: MAC addresses for LAN Ports?

MAC addresses for LAN Ports?

Re: It’s virtually an egg hunt!

Re: Z1 on a stick?

Re: Z1 on a stick?

Re: Z1 on a stick?

Z1 on a stick?

Re: MAC addresses for LAN Ports?

Re: Z1 on a stick?