Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Lamees
Community Record
11
Posts
0
Kudos
0
Solutions
Badges
Aug 26 2019
5:01 AM
We've already purchased MS120 and its installed and running. I know it doesn't support stacking. but the idea is for example, IP phone will have only one port, so it will not be connected to the second MS. Since HA its not available on it, it will be as spare switch and to be replaced when the first one is down. correct?
... View more
Aug 26 2019
4:58 AM
Thank you jdsilva I will not connect them together and follow the warm spare link, but is it really necessary to have 4 WAN links for a small topology like ours?
... View more
Aug 22 2019
6:56 AM
so in our network HA is available only on the firewall. Thank you Marc 🙂
... View more
Aug 22 2019
3:35 AM
Thank you for your reply. I know VRRP is available on the switches as well, but in this case we need to get another switch. My question was if there's an an internal redundant option inside the switch.
... View more
Aug 22 2019
1:47 AM
Hey all.. We have a simple network consists of 1 firewall and 1 switch and 4 APs. and we would like to upgrade the facility to become highly available.And we would like to apply this on both; the firewall and the switch. For the firewall we are going to put another one (and connect them together) and connect the switch with 2 uplinks toward them (for redundancy). My question is regarding the switch, does it support "hot standby with automatic switchover"? I mean is there redundant internal switching to provide high availability in the switch? We are using: Firewall: MX68 Switch: MS120 Thank you!
... View more
Feb 7 2019
7:13 AM
I have Meraki MX84, and I just received the following Alert: "A file download on your network 'XXX- appliance' was blocked in the last hour because it was determined to be malicious." I only can see the most affected clients, which is the Domain controller. How can I get a full report about this error from the firewall, and what kind of files they were downloading?
... View more
Dec 3 2018
2:33 AM
yes, they all running: MR 25.13, I thought it might be a known bug hitting it or something..
... View more
Dec 3 2018
1:45 AM
I can't. Some user's laptops don't support 5 GHz band. We have same setup in other branches and we are not facing this issue, its only seen in this branch. And all the users connected to 2.4 GHz are facing internet issues.
... View more
Dec 3 2018
1:38 AM
A very high utilization for band 2.4 GHz noticed on all 4 AP's. Although, I can see only 16 users out of 62 users connected using 2.4 GHz. I have disabled Air Marshal to avoid rogue SSIDs interference This Mac address "e0:cb:bc:b4:c5:e2" belongs to Cisco Meraki itself. Rebooted one of the AP's and it showed 32% normal usage then back to high utilization again. Those users don't support 5 GHz, so 2.4 GHz has to be enabled. And they are affected by this issue. Dual Band steering is enabled but still same issue. We are using Meraki MR52 that running version: MR 25.13
... View more
Labels:
- Labels:
-
RF Spectrum
-
SSID
© 2024 Cisco Systems, Inc.
