Hi, I have a strange issue.   MX85 as a security appliance, also provides dhcp on a few vlans.   my main laptop on vlan 1 can generally see devices on other vlans.   I’ve plugged a smart device into a switch port that has a pvid of vlan 2.   if the device is set to DHCP I can see the webpage of the device from my laptop on vlan 1 without issue.   if I set the device to a static ip with exactly the same address, subnet, gateway, dns - I can PING the device from the laptop, but can’t access the devices webpage at the same address.   any ideas? ... View more

I’m trying to set up a vlan on my MX64 to only allow users to access the internet if they check in using Facebook.   I have a couple of Facebook pages that I manage, and old style pages work just fine, however the “new style” Facebook pages throw up an error on the splash page saying to contact the administrator. I would ask Facebook, but they have no way of contacting them. ... View more

Ok, I have an MX64 with a primary uplink connected to a TalkTalk Business (UK) adsl router and the secondary uplink connected to a Three mobile 4G router.   Both work fine and failover if I unplug either cable.   However, there was an issue with the Broadband on the TalkTalk line where it had sync with the broadband line, but couldn’t actually see external sites. Therefore, whenever we browsed any site from inside the MX, we saw the default TalkTalk splash screen saying “your router needs configuring”.   Also, from the outside, meraki showed the appliance as unreachable.   it would not failover to the secondary uplink, even after two days!!!   I’ve looked at meraki’s criteria for the failover uplink to kick in, and I guess something else needs changing as this caused us an issue, and the fact the splash screen reports and responds to pings to any address, makes the MX assume it’s still connected correctly!   what can I do to sort this? ... View more