Not as of lately, Firmware is updated to the max and my setup is as described above and working well on both 5 and 6GHz. In pings my pattern before fix would be:   1 timeout to roam -> 3 timeouts after a few seconds   After fix:   1 timeout to roam or none what so ever.   laptop settings These are the settings i was referring to.   Since we use cloud radius we also adjusted the authentication timings in meraki but not sure it would matter much here.   And of course if nothing is working for you just open a support case ... View more

You mean for roaming?   I explained it assuming you manage the endpoints and you're using Windows.   1. Make sure 802.11r is enabled in your SSID in Meraki 2. On a managed laptop connect to WIFI 3. On the laptop navigate to: Network and Sharing center -> Click on your Wifi Connection -> Wireless Properties -> Security -> Advanced Settings -> 802.11 Tab   4. Enable both options under Fast Roaming.   We do use certificate based authentication. We also send a Wifi Profile via Intune for our Corporate WIFI to the managed devices. Perhaps these settings only show in these cases?   for the last months I've tried everything i could find online and other tweaks for my self and this was the only thing that actually made a massive difference.   As for other issues, updating to the current latest firmware seems to have done the trick. ... View more

Been battling disconnections from roaming for like 6-7 months. We went from MR53 to CW9176i, trying all different settings and we were still having issues.   We managed to achieve seamless roaming with RADIUS + WPA 3 and 802.11r and 802.11w active. 5Ghz and 6Ghz both active as well   Turns out these work well on Meraki's side and the most important thing you have to make sure is active is on the endpoints wireless profile (make sure you're connected to the network):    Network and Sharing center -> Click on your Wifi Connection -> Wireless Properties -> Security -> Advanced Settings -> 802.11 Tab -> Enable both options under fast roaming (keep default values)   Apart from having to find this info on Intel Forums, this completely changed the roaming behavior for us. You can test by leaving a -t ping to 8.8.8.8 and moving around forcing some roams. (At the moment we have literally 0 timeouts on pings when roaming) On top of that, before the 31.1.7 version our CW9176i functioning was hectic. From radios "freezing" to DHCP issues solved by restarting the AP's, all sorts of weird issues.   We updated to 31.1.7 2 days ago and today i noticed massive improvement in general functioning.   Hope this helps someone out there, especially the roaming part ... View more

We managed to achieve seamless roaming with RADIUS and WPA3, 802.11r and 802.11w active on CW9176i AP's.    Other than helping with roaming is there any reason to look into COA Support?   ... View more