This is really disappointing from Meraki.   Nothing in the release notes Nothing on the min/max supported firmware page No notification on the dashboard before proceeding with the upgrade that the firmware is not supported No warning on the dashboard when devices are EOL MS220-8P doesn't work even though not EOL Can't see what firmware you're stuck on No way of upgrading to the latest supported firmware.   ... View more

Thanks @michalc !   There have been no changes to the network that should affect the upgrade. I had upgraded the organizational level MR firmware just prior, however no upgrades were actually performed due to those devices no longer supported on current firmware - it was more just to clear the alert. I had also restarted our spare MX that morning. The main uplink was always online.   The only switch that rebooted itself was the MS225 which upgraded successfully.   Initially I tried a staged upgrade, with the first stage being a single MS220. That hadn't completed after 40 minutes, still saying "Started - not running configured version", so I called your support team. We manually rebooted, but no change. We then rolled back, and tried a "perform now" upgrade of all switches, which is when only the MS225 worked. We tried rebooting 2 of the MS220, but no change. Nearly 2 days later now, all 4 x MS220 still say "Up to date - Not running configured version".   I'm expecting an update from your support team on my case today. Thanks ... View more

Does anyone know if this actually works on MS220? I had an MS225 work, but 4 x MS220 all still say "Not running configured version" after nearly 3 hours. Tried rebooting one, but still no. All were on 16.7 prior to upgrade. Thanks! ... View more