Meraki

jimmyt234

The unfortunate reality is that you need to manage your own firmware as letting Meraki automatically update, as you have experienced, doesn't happen half the time and you end up with networks in Critical status that have not been upgraded in years.

Ryan2024

Personally? I'm just trying to reduce the extra traffic caused by broadcasting a (seemingly) superfluous SSID.

PhilipDAth · ‎Jan 16 2025

If you use WPA2-Enterprise mode authentication you could check your RADIUS server logs. If you are using Windows NPS as your RADIUS server, filter the security log on the NPS server for Event ID 6272.

PhilipDAth · ‎Jan 14 2025

Several thoughts. 1. You could get the SOC to monitor the APs and the firewall. Then they'll be able to see clients. 2. You are probably using SSID NAT mode. If you create a dedicated VLAN for guests, and bridge the SSID to that VLAN they'll be able to see the individual clients on the firewall.

Meraki

Community

About Ryan2024

Ryan2024

Community Record

Badges

Re: Automatic Firmware Upgrades

Re: "Wired clients are part of the wifi network" setting

Re: Viewing Clients Connected between XX:XX and YY:YY

Re: 802.1x and Malware Identification