I am working on this with meraki tech team. I had 4 sessions with them approx 15 hours. i will update here if i got any resolution.  ... View more

No useful logs after reboot.    Initializing Hardware... System Bootstrap, Version 17.12.2r, RELEASE SOFTWARE (P) Compiled Thu 08/31/2023 17:19:41.28 by rel Current ROMMON image : Primary Last reset cause : PowerOn C9300L-48PF-4X platform with 8388608 Kbytes of main memory boot is : [ boot flash:packages.conf ] boot: attempting to boot from [flash:packages.conf] boot: reading file packages.conf # ############################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################## Oct 10 11:47:37.539: %BOOT-3-SYSD_STARTFAIL: R0/0: Failed to launch boot task fpgahelper_autoupgrade.service ( exit-code ) MCU 802.3bt mode supported: False, BT mode: False Both links down, not waiting for other switches Switch number is 1 Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. Cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706   Cisco IOS Software [Cupertino], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 17.9.3m5, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2024 by Cisco Systems, Inc. Compiled Wed 17-Jul-24 19:46 by mcpre   PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR LICENSE KEY PROVIDED FOR ANY CISCO SOFTWARE PRODUCT, PRODUCT FEATURE, AND/OR SUBSEQUENTLY PROVIDED SOFTWARE FEATURES (COLLECTIVELY, THE "SOFTWARE"), AND/OR USING SUCH SOFTWARE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN. Your use of the Software is subject to the Cisco End User License Agreement (EULA) and any relevant supplemental terms (SEULA) found at http://www.cisco.com/c/en/us/about/legal/cloud-and-software/software-terms.html. You hereby acknowledge and agree that certain Software and/or features are licensed for a particular term, that the license to such Software and/or features is valid only for the applicable term and that such Software and/or features may be shut down or otherwise terminated by Cisco after expiration of the applicable license term (e.g., 90-day trial period). Cisco reserves the right to terminate any such Software feature electronically or by any other means available. While Cisco may provide alerts, it is your sole responsibility to monitor your usage of any such term Software feature to ensure that your systems and networks are prepared for a shutdown of the Software feature.   FIPS: Flash Key Check : Key Not Found, FIPS Mode Not Enabled cisco C9300L-48PF-4X (X86) processor with 1309176K/6147K bytes of memory. Processor board ID FVH2819L5WD 2048K bytes of non-volatile configuration memory. 8388608K bytes of physical memory. 1638400K bytes of Crash Files at crashinfo:. 11264000K bytes of Flash at flash:. Base Ethernet MAC Address : 9c:38:18:74:f4:00 Motherboard Assembly Number : 73-102172-06 Motherboard Serial Number : FVH28180U63 Model Revision Number : B0 Motherboard Revision Number : A1 Model Number : C9300L-48PF-4X System Serial Number : FVH2819L5WD CLEI Code Number : INMEF00BRE SETUP: new interface Vlan1 placed in "shutdown" state ... View more