HI Team, I have configured MX 84 HA setup exactly as per the below diagram, and I am able to get Internet from switches on both the WAN ports in MX1, but the MX2 SPARE is showing as "Unreachable" and HA link is showing GREEN on both. Device - 2 MX 84 and 2 MS MS250-48LP Below are the Public IPs I got from both of my ISPs ISP 1 - 49.xx.1.104/30 49.xx.1.105 - PE and 49.xx.1.106 - CE 49.xx.8.168/29 - Lan Public IP's ISP 2 - 182.yy.80.104/30 182.yy.8.105 - PE and 182.yy.8.106 - CE 182.yy.3.104/29 - Lan Public IP's Configuration on MX1 WAN Ports: On MX1 WAN Port 1 - I have configured /30 of ISP 1 On MX1 WAN Port 2 - I have configured /30 of ISP 2 The Internet on both WAN Ports of MX1 is fine, but Spare is showing Unreachable. HA Config Model of other Vendor: For any Vendor models , we just configure WAN link with /30 ips on ACTIVE Device and this same configuration will be replicated to Passive DEVICE. In terms of failure the Passive device gets ACTIVE Device configuration and will be UP and running. Not sure how the Meraki HA works? Team, can some one pls help out here??
... View more
