hello,    i have  an environnent auto vpn between meraki mx, i added vMX on Azure cloud i followed the steps here    https://documentation.meraki.com/MX/MX_Installation_Guides/vMX_Setup_Guide_for_Microsoft_Azure   i configured all, vMX(HUB) can ping inside azure subnets but the users behind another Mx (HUB) cannot reach the Azure subnets, can reach only internal vMX ip 192.168.128.1/24   azure vnet is 10.1.0.0/20 azure subnets 10.1.1.0/24                          10.1.2.0/24    i created route table as mentioned in meraki documentation but still same problem cannot reach azure behind mx and i am sure it is a routing problem     ... View more

  does this configuration limit the bandwitch of windows update for all company or per user ? ... View more

why my green status on meraki client for a switch in the network is grey or offline unless i access the switch, please note that the old configuration was on vlan 1 and it was working fine, i deleted vlan 1 i created vlan 10 and 250 vlan 10 configured as native, vlan 250 management so on the switch i configured interfave vlan 250 with ip address     config on meraki native vlan 10, allow vlan all   on switch switchport native vlan 10                   switchport trunk allowed all vlan                  switchport mode trunk    switch is CBS 250  ... View more

can i chose a specific URL to use specific wan in my meraki mx as we de for an IP address ? in order when we need to use this url our ip address does not change as we have 2 WAN connectd ... View more