Meraki

Community
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

About danwestbrook

Re: All devices reporting as being wired to MS120-8LP instead of MX64W

by in Security & SD-WAN
‎Oct 5 2018 10:54 AM
1 Kudo
‎Oct 5 2018 10:54 AM
1 Kudo
Thank you for pointing this out. ... View more

Re: All devices reporting as being wired to MS120-8LP instead of MX64W

by in Security & SD-WAN
‎Oct 5 2018 10:54 AM
‎Oct 5 2018 10:54 AM
You sir are a genius, that seems to have fixed it. Out of interest why does the all view default show them as wired into the switch rather then the security appliance view and is there away to change it? ... View more

All devices reporting as being wired to MS120-8LP instead of MX64W

by in Security & SD-WAN
‎Oct 5 2018 9:23 AM
‎Oct 5 2018 9:23 AM
I recently added a MS120-8LP to my setup, before I was just using the MX64W and since I've connected it to port 1 on the MX64w all my devices are reporting as being wired to the switch port in network-wide > clients even though some are on Wifi etc.  If I check the Security Appliance all the devices report correctly and sit in the correct vlan etc.  I have since tried to just make the switch use VLAN 3 and 192 for which I changed the settings for port 1 on MX64w but that still hasn't really helped.  I'm not sure if this is a bug or some error in my configuration (most likely the later).  Has anyone else had this problem or can suggest what might be wrong?  ... View more
© 2024 Cisco Systems, Inc.