Meraki

kYutobi · ‎Jan 30 2020

Even though it is the same VM on a new host is the virtual mac address the same? Also recommendation would be just to delete both (if they are there still) and re-enroll the VM that was moved over.

kYutobi · ‎Jan 29 2020

Do you know what might be causing the interference? Microwave, radios, handheld phones (2.4ghz), etc? You would also be able to change your channels manually away from channel 6 if it's congested through your "Radio Settings" and see if it improves. Since I don't know what's in the warehouse I cannot give you more info but I hope this helps.

kYutobi · ‎Jan 27 2020

You add them as if you were adding a wireless client. Select the dropdown and assign policy.

kYutobi · ‎Jan 27 2020

You can create a "group policy" that way you have a list of MAC addresses you import plus make your own rules and blocks for that policy. You won't need a RADIUS server.

kYutobi · ‎Jan 23 2020

@Twitch You could possibly demo so that you can get familiar with the products. That way you can get a general understanding and also look a lot at the webinars as they help with getting to know features as well. Hope it helps. I went to the training as well with @Nash and she makes a point where classmates were " Cisco sales engineers, large Meraki partners, and mostly otherwise people from companies with millions of USD in Meraki gear."

kYutobi · ‎Jan 23 2020

@BrechtSchamp it was on the "change log" in Dashboard. Thanks for link.

kYutobi · ‎Jan 23 2020

Is this just me? I was trying to look at this and page cannot be found.

kYutobi · ‎Jan 23 2020

Barcelona is beautiful. Hope you all enjoy.

kYutobi · ‎Jan 16 2020

@jsurles Login to the local status page. You should be able to configure port there.

kYutobi · ‎Jan 15 2020

Congrats everyone and newcomers welcome.

kYutobi · ‎Jan 7 2020

@Nash do not know why but I thought it was being depreciated. CMNA Advance your ability to sell the Meraki the Meraki solution and configure key features through this hands-on technical program for pre-sales engineers. Maybe it was about doing CMNO as opposed to CMNA because it that's more sales than anything.

kYutobi · ‎Jan 7 2020

ECMS1 is the equivalent of CMNO [Cisco Meraki Network Operator]. CMNA is being depreciated. ECMS2 is that second course needed to obtain the CMSS [Cisco Meraki Solutions Specialist] which should be getting released sometime in 2020.

kYutobi · ‎Jan 6 2020

CONGRATS!!!! 2020's first MOTM

kYutobi · ‎Jan 2 2020

Congrats guys.

kYutobi · ‎Dec 19 2019

Just listened to it not too long ago. It appears SWAG is a thing here right @jdsilva 😂😂😂

kYutobi · ‎Dec 18 2019

@BrechtSchamp congrats bro!!! 🎉

kYutobi · ‎Dec 17 2019

App will not be removed like you said. It just won't be managed.

kYutobi · ‎Dec 11 2019

A sort of AI that studies/checks your network from the switch, ap, and mx. It will let you know of cable errors, loops, etc. Basically what the Meraki Wireless Health is but fused together with all network hardware.

kYutobi · ‎Dec 9 2019

You can try setting it 80Mhz which will give you less channels but more speed.

kYutobi · ‎Dec 9 2019

https://community.meraki.com/t5/Switching/STP-guard-setup-best-practices/m-p/31165#M2628 Hope it helps.

kYutobi · ‎Dec 5 2019

Let's do this 2020. 😁

kYutobi · ‎Dec 5 2019

@NolanHerring Thank you. I thought I was alone in this. FYI this all started when people on the 5GHz on channel 40 were getting kicked out form wifi and when I looked at live RF data it showed 50% interference on channel 40. What I've done for a workaround is just disable that channel but from what I can gather it might be the hardware itself and from what it collects it makes "bad decisions" thinking it's helping.

kYutobi · ‎Dec 5 2019

Sorry @NolanHerring might've not caught the screenshot in time. DOH! If you do check the solid "red lines" coming across the channels and it shows. Ch1 Ch5 Ch9 Ch11

kYutobi · ‎Dec 5 2019

We had a wireless expert come in and use 3 different spectrum analyzer (very sensitive) and he's getting clear readings. For some reason the Meraki AP is showing that interference is crazy. We then moved it over to another spot where we knew interference wasn't present and there it was again. Any thoughts?

kYutobi · ‎Dec 4 2019

You can try to create the new network then combine them. That can be done in the Organization/Overview tab.

About kYutobi

kYutobi

Orlando Encarnacion

Community Record

Badges