Just checked, today but the new Cameras are still not in the Tool 😞 ... View more

Hi Prashan   You can go to Networkwide --> Group Policies and generate a new Group Policie put the Scedule option to on and you can select time and day based Policies.     I hope i could help you with this. ... View more

It is just Great to be a Part of this Community. So many Help and great people. Please continue and see you in Cisco Live 2020 in Barcelona 🙂 ... View more

Meraki is the Best Company Cisco ever bought. I am sure if Meraki continues as they do, soon it will not anymore be "Meraki a Cisco Company" but "Cisco a Meraki Company" 🙂 ... View more

Hi Noah,   We just found out that the Problem only happen if you rollout a Phone witch is already in the Device List. (Has ben rollout before) If you delete the device in the Dashboard and you factory Reset the Phone it works perfect. I updated the Case with pictures and all the necessary comments.   Regards Michel ... View more

Hi Noa   Just did it 🙂   Cisco Meraki Case 0435191   Thanks Michel ... View more

I was on the link https://meraki.cisco.com/products/security-cameras/site-survey just now and the new Cameras was still not there 😞 ... View more

Hi Blake   I have the Same Problem now. I have to import 1600 User (Owner) but do not have a AD or other Connection. It seems there is no way to import a default password with the CSV File.    I don't understand why as it is possible to set a default password for the user true the Dashboard.   We need now to set manual 1600 times a password 😞 ... View more

Hi all,   I just got thee information from a Meraki Guru that the MX67 and MX68 will get 802.1x soon true a software update. So lets wait and see 🙂 ... View more

Wow, I remember when everything started. I tell to all my Costumer that this Community it the place where you get all the answers you need about Meraki. Sometime even faster than if you open a Case 🙂    Continue and one Day i am Sure it will not be any more "Meraki a Cisco Company" but "Cisco a Meraki Company"    Regards Michel Rueger ... View more

Hi All, Thanks for all this replays. It seem to be a bigger Problem. I will ask this to my Swiss Meraki Engeneer. ... View more

Hi,   I have the Same Problem. I just found out that if you are using KNOX and control KioskMode true it you can control Baterie Status:     I dont know if this help you but if i find more I will post it.   Regrads Michel ... View more

Yep it show me that it was a disconnect and the from to time always around 2 minutes. I thinks it is the Service Provider Router rebooting sometimes but it is just strange that this events don't show in any Log files of the MX? ... View more

Yes sure, but you will still not know what happens. It just tell you faster that there was a problem. ... View more

Hi Robin   I just checked everithing at home and I have the following Seetings.   To my Internet Provider I have a XDSL ROuter with Firewall. on this I added a Portforwarding to the Meraki WAN IP Adress for:   sorry it is german 🙂 in fact the UPD Port 500 and 4500 are forwardet to the IP Adress of the MX WAN. qitch in my case is 192.168.1.101 as the network between the Internet Router and the MX is 192.168.1.0. Behind the MX also LAN site I have 192.168.4.0.    I point my MAC VPN Setting to the Public IP or DNS from the Internet Router witch is shown in the Dashboard of the MX as Public Name or IP.    The Client VPN Settings of the MX are the following: This is plan helps perhaps to understand.     I hope this helps.   Regards Michel   ... View more

Hi All,   The best way is to use the DNS Name of your WAN Conection. This one is visible on the main dashboard view of your MX:     Or you are using the Public IP but this one will change all the time. On your ADSL Router or Firewall in front of your MX you need to Make a Port forward to the ip address of the WAN interface:   This information you find on the Uplink TAB     So the VPN Client connect to the public Name or IP. The front Firewall or ADSL Router NAT to the WAN interface from the MX   Hope this helps Regards Michel ... View more

Hi Michael,   I am using MAC OSX to connect to my Meraki Home Network true Client VPN. My Meraki MX is behind a Service Provider ADSL Router witch is making NAT, so you need to open the specific port to be able to connect to the MX as VPN Device. But as you tell us that with other Device it is working this is not the Problem. are you Using a other User? Every User must be Enabled for VPN Connection.      On the Mac Site i go to Network Settings and and a VPN:   After this be sure your Shared key is correct. This was my problem some time. Also be sure that your are testing from the same Place as the other Systems witch are working. As for example from my corporate network I can not connect as the Ports for VPN are Blocked. I alway use my Mobile Phone Hotespot.   Hope this helps you. If not just send some Pictures of your MAC Settings.   Regards Michel Rueger ... View more

Hi Karlo,   Yes and No,  If your Meraki Network is not to big or you know the Serial Number of the Meraki Device (Switch, AP, MX) you can youse for example Postman and the API {{baseUrl}}/devices/{{serial}}/clients?timespan=86400  This will show you all clients connected on this device for the last Mount.    There is a other way. If you have the Clients attached to spezial Policy Group you can select the "all clients with a policy group " view and then export the list to a XLS File. You will see all clients even if there where not connected more than a mounts.     Hope this will help you.   Regards Michel Rueger ... View more

There are still only the old Kameras! when will be there a update?   Picture from today!     ... View more