Meraki

EJN · ‎Mar 25 2022

I believe iframe is not allowed. See bottom of this page. https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Customizing_the_Splash_Page

EJN · ‎Mar 24 2022

In Dashboard, go to Switch > Switch Ports. This will give you a list of all switches and ports, and you can sort by many of the columns, including on/off.

EJN · ‎Mar 21 2022

I also opened case, but it looks like development has already acknowledged based on above posts.

EJN · ‎Feb 17 2022

Some years ago we looked at Flock, but didn't pursue further. Their focus is on HOA and Police Departments. Now Motorola is going into this space too. Just posting here to get more awareness. https://ipvm.com/reports/moto-l6q

EJN · ‎Feb 9 2022

I need to head out now. Will test from home tonight and I suspect it will work OK from home as it did for you. If you can help me with firewall rules, ACLs or DNS that will be appreciated as I'm lost on those.

EJN · ‎Feb 9 2022

Another screen shot viewing live attached. As far as I can tell there is no blocking. Is this something we can test on a WebEx? Are you able to connect or only through the forum here?

EJN · ‎Feb 9 2022

Also, iOS app works OK. I can go to past times/dates in the app (while on Meraki WiFi in our LAN).

EJN · ‎Feb 9 2022

Support access is turned on for the cameras.

EJN · ‎Feb 9 2022

Same problem in Vision Portal. (I'm very grateful that you are helping me.)

EJN · ‎Feb 9 2022

Couple more screen shots that may help point this in the right direction.

EJN · ‎Feb 9 2022

@Ryan_Miles See attached screen shot. Does this help? I see red but cannot decipher the log.

EJN · ‎Feb 9 2022

You have given me the most hope in finding resolution to this. Thank you. I will test from home tonight and report back. I will also turn on Meraki access. And I'm all for the WebEx so we can see it real time. DNS are our internal Windows 2019 DNS server, which relies on our Comcast fiber connection for DNS. How would I change the DNS for the cameras to test? I will also tests Dev Tools in Chrome. Export to HAR and post?

EJN · ‎Feb 9 2022

Thank you. I will try with an IP range.

EJN · ‎Feb 9 2022

Case opened and unfortunately we continue to experience this. It does not happen on the iOS app. Only on any browser Windows or Mac. Multiple users reporting the same issue. All on our LAN on wired or wireless connections. Don't know how to troubleshoot and growing frustration.

EJN · ‎Feb 9 2022

What goes in each field in Traffic Analysis Custom Pie Chat?

EJN · ‎Feb 9 2022

Same issue. Haven't been able to fix with support. 43 APs into 21 MS switches into a core MS390 into a Juniper SRX1500 Comcast Managed Router. It's not power or ISP down. Random APs at random times. Usually under 5 minutes. Some days none, some days a few. Running 28.6, but now new. This has been happening since Fall 2021, but for sure more often since December. Could this be port 443 related? If yes, I'm assuming this requires a call to Comcast to open that port on the Juniper SRX1500?

EJN · ‎Feb 8 2022

We have 21 MS and 43 MR devices. Occasionally but frequently and with no pattern, an AP will lose connection to the Cloud. It usually comes back online within 2 minutes. I opened a case but we haven't been able to reproduce or troubleshoot and was told there is nothing in the log that provides a clue as to why. How can I best troubleshoot this? It's not a loss of internet or power. Below is an example: 1 access point on the St. Bonaventure - wireless network has become unreachable from the Meraki cloud. SBS-AP-143 xx:xx:xx:xx:xx:xx 04:25 PM EST on Feb 8 1 access point on the St. Bonaventure - wireless network regained contact with the Meraki cloud. SBS-AP-143 xx:xx:xx:xx:xx:xx 04:31 PM EST on Feb 8

EJN · ‎Dec 10 2021

Lately, most of the time, but not always, when accessing historical video (recent or longer), the video doesn't load and the time dial stays on screen. See attached. I wanted to post here before opening a case with support. Any camera. Access via LAN (green check box). Latest fw. Any browser.

EJN · ‎Dec 9 2021

That worked. Amazing. Exactly what I needed. I wonder if this is a "feature" that should be advertised and how far back you can go.

EJN · ‎Dec 9 2021

Understood and agreed. However, where are the timeline thumbnails coming from? Any way to access those?

EJN · ‎Dec 8 2021

I need to access video outside the retention window. I cannot go to the video, but if I hover over the timeline, I can see a thumbnail in the motion timeline (yellow bars). Any way to access these?

EJN · ‎Dec 6 2021

LOVE

EJN · ‎Nov 4 2021

Count me in

EJN · ‎Nov 2 2021

New feature request for Meraki... like Apple and Samsung, offer the APs in 3 different colors... Arctic White, Midnight Black, or... Clear?! ;o)

EJN · ‎Nov 2 2021

You can mount it in the wall or ceiling. You use the same bracket, and anchor to wall or ceiling according to your surface. The radiation pattern will change. Depending on your room size / coverage area, this may or may not matter. For example, I have one in each classroom. Some are wall mounted and some are ceiling mounted. Due to the size of the classroom, coverage wise it makes no difference for our needs/use case.

About EJN

EJN

Esteban Nunez

Community Record

Badges