Did you open a case for that? This bug is quite severe and hopefully gets fixed fast when Meraki is aware of this. ... View more

I hope that v16 goes GA really fast, the AnyConnect PLUS license is typically quite cheap. ... View more

@Bruce , your Link does not work, but probably it's this statement: An AnyConnect Plus termed license will be required to use AnyConnect on the MX when MX16.X firmware goes GA. Until that time, if an MX upgrades to MX16, AnyConnect will be available as an option. If a license is not linked when MX16 goes GA, AnyConnect will become unusable until a license is applied. More details on applying licenses will be available soon.   ... View more

When I configure remotely a stack the cables are typically already connected by the on-site technician. I do not remember it not to be green when I start with it. But I would not vouch for it. After configuring, it often turns temporary orange complaining about wrong DNS or VLAN. ... View more

@AB_LaDigue67 wrote: Maybe you are overthinking it?  Yes, I heard that before .. But it really was only a flaw in my logic!   It has to be a stack as the uplink port has to be available. If it would not be a stack, the uplink-port had to be on this device. ... View more

I am not sure if this question is really accurate. Why? I assume that only one answer is correct as there is no "choose two". Based on the port-icons, a) and b) are correct answers. But if you only have to choose one, it has to be d) as c) could als be correct. But it doesn't have to be because just connecting the stack-cables doesn't make it a stack-member. And again, I don't get the two hints above ... 😪😫    BTW: The answer is song four on side one of "The Miracle". (Ok, the millennials will now say "side one???" what is he talking about??? ...) ... View more

I think we should end the contest right now!  😀 ... View more

@MacEdge-Dan It's not cleaned up until you have removed the Unify-Box ... 😉 ... View more

@AB_LaDigue67 wrote: Prince Andrew and Prince Charles That's a good one! But I think Prinz Andrew first has to kill five people in front of him. 🙂 ... View more

@cmr wrote: Aren't they both the same number (or is my research not up to standard....) 😉 Where did you research? https://www.mavs.com/team/roster/tyrell-terry/ https://www.mavs.com/team/roster/trey-burke/   ... View more

Tyrell Terry and Trey Burke ... View more

I go with: e) the answer is basically "c" but this time our developers did not remember what the word Meraki stands for and decided to present a meaningless error-message (as quite often). ... View more

How much traffic do you expect? With six VPN-peers they have to push some traffic to hit the gigabit limit. And if you really go to 1 Gig VPN-Throughput, you likely have the MX250 which has SFP+. ... View more

And to add to what @cmr said: It will be one of the most beautiful doorstop on the market. 😉 ... View more

  First we have to find out the relevant information:  - AutoVPN is in use, but uses SplitTunnel  - It is traffic to the internet  - Load balancing is enabled  - The only flow-Preference for the source is the last one for 9.9.9.9/32. Although it is an address on the internet, it's not "the internet".   It is not a) or b) as we have load balancing enabled but no flow preference matches It is not c) or d) as it is no AutoVPN-traffic The answer should be "e". ... View more

I just don't care as it is very often out of my control. The patch panels are often SC or ST, sometimes LC. The network-equipment is nearly always LC nowadays. It's just important to have enough different cables with the right connectors in you bag. ... View more

I think this could be done with the help of the API. A monitoring station checks for RADIUS-functionality on both PSNs. If both are offline you issue an API call to change the port-settings to something useful in that situation. ... View more

I think it is important to look exactly at what is happening here. It wouldn't make any sense to upgrade a Z1 to 15x, but we are not really upgrading devices. We are just setting the intended Firmware-version for a dashboard network whatever devices are in there. And the network can easily be configured for v15 regardless if it is a Z1 in there or a Z3. But the moment the Z1 is replaced by a Z3, the Z3 will run the configured version. ... View more

This is one of my mixed networks: The MR30H is in the process of upgrading just now. And this is one SSID without one of the 27.x features:     ... View more

I also really don't know. But if this would be a real exam I would approach it the following way:   - One of them (b) is organisation-based and a clear candidate for UTC. - Two of them (a and c) are for events that are local to a network and the network has it's own timezone. - One (d) is a log that is based on a Meraki network but he events can relate to any timezone because the devices are roaming, This would also be a candidate for UTC.   With (a) and (c) ruled out there it is 50:50 chance and my guess (based on what is more likely) would go to (b).   ... View more

@Dustin_Hollis @Twitch  And now look again *which* Tags you use there. The ones assigned to a network or the ones assigned to an AP. ... View more

After this lengthy discussion, do you understand why I just place another VPN gateway to the network? 😉 ... View more