Meraki

Network-dad · ‎Jun 17 2020

@kYutobi one thing to keep in mind is how many clients do you anticipate on connecting. If you think you are going to have large number of people you will likely have to have multiple AP's and load balance with a concentrator for best performance... at that point you don't need a crazy AP just will dispersed and placed AP's

Network-dad · ‎Jun 17 2020

Welcome to the community Vinay!

Network-dad · ‎Jun 17 2020

Well there is always something to do with Meraki I have found... I'm always looking for ways to better my networks...😁

Network-dad · ‎Jun 17 2020

Welcome to the community Marlon! There are a lot of very knowledgeable people here... what are you looking to learn about API's?

Network-dad · ‎Jun 17 2020

Not natively in the dashboard... you may be able to do this using API's ... check out this artical https://community.meraki.com/t5/Dashboard-Administration/Update-Client-Name-using-API/m-p/41755#U41755

Network-dad · ‎Jun 17 2020

Meraki put this out on the blog a few months ago .... its a good read https://meraki.cisco.com/blog/2020/04/meraki-access-points-wi-fi-certified-6/

Network-dad · ‎Jun 17 2020

Welcome Brian to the community! ... there is a lot of people here that are more than happy to help.. Do you have any big meraki projects coming up?

Network-dad · ‎Jun 17 2020

Welcome to the community Lour!!!! Glad to have you here.

Network-dad · ‎Jun 17 2020

What AP's are you using? for our big outdoor areas I have lately been using the MR84 with the Dual-Band Omni (MA-ANT-20)

Network-dad · ‎Jun 17 2020

Pre-shared key, we have a splash screen but that just for ToS

Network-dad · ‎Jun 16 2020

Thanks @CarolineS everything looks great to me!

Network-dad · ‎Jun 16 2020

OMG ive been looking for a way to do this forever!!!!! thank you

Network-dad · ‎Jun 16 2020

Hello Everyone, I have several different locations stating that they are occasionally getting guests coming up stating there are getting and incorrect password error when they sign in... At first I wrote it off as human error but now it is happening too often at too many locations to ignore. I double checked and they were indeed entering the correct password and everything looks good at my end... What could be causing this?

Network-dad · ‎Jun 16 2020

Welcome to the community!

Network-dad · ‎Jun 16 2020

Welcome to the community! Glad to have you hear and wish you luck on your Meraki conversion... it will pay off in the end!

Network-dad · ‎Jun 16 2020

We have just been using Meraki's Z3 because our Mitel phones are garbage..... The issue would be the QoS over the VPN would likely be garbage and the amount of traffic would be unreal... Probably a soft phone or a teleworker phone would be the best option.. I did found this interesting thread on Reddit though https://www.reddit.com/r/meraki/comments/9tglcd/voip_phone_with_meraki/

Network-dad · ‎Jun 16 2020

Welcome to the community @Josh_Vooris .. congrats on the CMNA!

Network-dad · ‎Jun 16 2020

Welcome to the community David!

Network-dad · ‎Jun 16 2020

Welcome to the community! That's a nice setup you have there.

Network-dad · ‎Jun 16 2020

Welcome Kunal to the community... there is a lot to learn here and tones of helpful people.. don't be afraid to ask questions.

Network-dad · ‎Jun 16 2020

Welcome to the Community Jeremiah!

Network-dad · ‎Jun 16 2020

What does your network look like? Are you full stack Meraki? What Traffic Shaping rules do you have in place? is this on a guest network being NATed?

Network-dad · ‎Jun 16 2020

Welcome Pat to the community! there is a lot of great information here... If you have any questions don't be afraid to ask.

Network-dad · ‎Jun 16 2020

Welcome Chris! Glad to have you here!

Network-dad · ‎Jun 16 2020

Welcome looking forward to talking more!

About Network-dad

Network-dad

Dakota Seufert-Snow

Community Record

Badges