Meraki

Raju83

Hi
We are facing Meraki MR42-44
auth_mode='wpa2-psk' 11k='1' 11v='1' error_code='17' radio='1' vap='0' channel='64' rssi='33'

We have no SD WAN. only cisco meraki and tplink er8411 router. all clients suddenly facing that error 17

1. auth_mode='wpa2-psk' 11k='1' 11v='1' error_code='17' radio='1' vap='0' channel='64' rssi='35'

2. auth_mode='wpa2-psk' 11k='1' 11v='1' error_code='17' radio='1' vap='0' channel='157' rssi='31'

Please give any solution

rwiesmann

check this community post

https://community.meraki.com/t5/Wireless/Meraki-MR-Local-Auth-Error-17/m-p/246410

alemabrahao

Are 802.11k and 802.11v enabled? If so, try disabling them.

How is the signal to clients?

Are there any interference detected on the network?

I recommend that you open a support case.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

cmr

31.1.7 has been released and has this fix:

Clients disconnect with error code 17 (Wi-Fi 6, Wi-Fi 6E, Wi-Fi 7 APs)

If my answer solves your problem please click Accept as Solution so others can benefit from it.

rwiesmann

@cmr I have also seen this in the rel notes and was wondering if it may be this