Hello,
How to read/interpret the Antenna Radiation Patterns in the Meraki Datasheets. For instance, Dipole MA-ANT-3-B5/6 has a Gain of 3 dbi (2.4Mhz and 5.7 dbi (5Mh). The H-Radiation diagram shows a a circle (this is an omnichannel antenna) with a diameter of 10 dbi at all angles and all the inner circles have decreasing dbi. How the '10' relates to the 3 and 5.7 Gain? I assume moving towards iiner circles represents loosing Gain. Also . there is a Vertical scale to the left of the polar diagram called 'Normalized Gain' How does this relates to the Radiation/ Polar Diagram?
Thank you for your help.
I think that it answers your question.
Can you elaborate a bit more? I see the polar diagrams but how does that answer the questions I'm asking?
Thanks.
Hi Alemabrahao, I understand the V and H plane perspectives and omnichannel vs directed patterns. What I'm trying to understand is:
A) how the scale in the polar diagram co-rellates to the gain in the datasheet? For instance, in this graph, on the H-plane I see a max gain of 10dbi at any angle but the datasheet is saying a 3 dbi gain @ 2.4 Mhz.
B) what the normalized scale on the left (vertical bar) is telling me? and how does it correlates to the polar graph to the right?
Can you help me with that? Thanks.
But then you want to get into radio frequency details. In this case there are many concepts to be understood, so I advise you to read some documents.
https://simplewifi.com/pages/antenna-basics
https://support.huawei.com/enterprise/br/doc/EDOC1000077015/cb29154d/antenna-gain
But in this case, I advise you to focus on what the datasheet informs, which in this case is that the maximum gain for 2.4Ghz is 3 dBi and 5Ghz is 5.7 dBi.
The patterns aren’t super useful on their own. I’d use something like Hamina.com to test how it would actually work depending on the Tx level set. Hamina offers a free tier so you can check it out.