Upgrade pushed to 27.3 on network with MR32s

[cmr]

Not sure if anyone else has had this happen, but we've just received a notice that one of our networks currently running 26.8 that consists of MR32s and MR42s, is going to be upgraded to 27.3

This seems rather odd as MR32s don't support 27.x and Meraki have been recommending not to have mixed versions within a network.

Have I missed an announcement or something?

[DarrenOC]

Hi @cmr I assume you’ve cancelled the upgrade pending further clarification?

[cmr]

Today I received another upgrade notice for three other networks running 26.8, these ones are going to be upgraded to 26.8.1 which makes more sense as they have a mix of pre and post 802.11ac wave 2 devices.

Anyone else receiving these upgrade schedules and having the same odd experience as we are?

[cmr · Accepted solution]

@DarrenOC I just made the 26.8.1 (upgrades) happen now and cancelled the upgrade to 27.3 then moved that site to 26.8.1 as well.

None of it actually changes any firmware as there are no WiFi6 APs in Amy of those 4 networks so 26.8.1 is actually remaining at 26.8....

🤔