Hi everyone im pretty new to Meraki and was wondering if setting up an Meraki AP i can have it integrate with an existing SSID and 3 other AP's from Ubiquiti to allow devices to roam between the two company's AP's?
haha thanks for the info i dont have a Meraki AP yet but was thinking of getting one
You also need to disable security features on both platforms, or both will see the other as an attacker.
why does it sound like that?
roaming between access points works great with Ubiquiti, i was only asking if I get a Meraki from my employers partnership if it would work and play nicley with my unifi gear in terms of roaming devices like my phones and tablets.
its a home environment not a commercial one
Enterprise access points usually have a rogue AP feature.
In your case you'll have access points with exactly the same SSID and on the same wired network. This will be seen as a true malicious rogue AP because someone could impersonate the SSID to do man in the middle attacks.
Because in your case you just want extra connectivity you'll have to make sure to 'whitelist' the ubiquiti AP's on the Meraki side and do the same for the Meraki AP on the ubiquiti side.
Also for good roaming you won't be able to use 802.11r because of two vendors so you WPA2-Personal as security option in this case.
no worries yes it will not be open at all,
out of curiousity I have a guest wifi SSID set up with a captive portal for friends and family set on the Unifi controller as well
I know Meraki supports the same but is it possible to point to my unifi controllers internal IP for the captive portal so basically anyone in my home gets the same portal when logging into our home guest wifi?