Question around MR74 and MA-ANT-27

CarlT
Here to help

Question around MR74 and MA-ANT-27

Hi All

 

I have a question around the antenna for the MR74

 

The MR74 has N type connectors at the top for a 2.4 and another for 5Ghz radio.

 

If I want to use the MA-ANT-27 antenna with this can it only go into one of the radio's at any time? for example I can run it at 2.4 or 5 depending which radio its connected to?

 

If I wanted both bands at once would I need to use the MR84 ?

 

Cheers

1 Reply 1
Bruce
Kind of a big deal

You’re correct, the MR74 has two 2.4Ghz connectors on top, and two 5GHz connectors on the bottom. The MA-ANT-27 is a dual band antenna, but only has two connectors - so it will connect to either the 2.4GHz or 5 GHz connectors (not both). If you want to connect to both the 2.4GHz and 5GHz radios then you will need two of the MA-ANT-27 antennas - one connecting to the top, one to the bottom.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels