Meraki Profiling support with ISE integration

[shivaprasadguds]

Hi Team,

Few questions on Meraki profiling support for wireless and wired.

In the Cisco ISE compatibility matrix, it is mentioned that Meraki Wireless & Wired devices support full Profiling.

But in the Meraki to ISE integration document, it only supports Radius calling station-id attribute ?? Hence i wanted to ask here if Meraki Wireless & Wired support other probes like DHCP, SNMP, etc or only Radius calling station-id attribute.

Thank you

Shivaprasad Gudsi

[Jeff-US]

I tend to doubt that it would support other probes.  I think Cisco stretches the word integration a bit in regards to Meraki and Cisco ISE.  The Meraki dashboard simply uses ISE as a radius server, so all you get at the ISE end are radius authentication and accounting information.

That said, I do not use the profiling feature of Cisco ISE, but since there is no mechanism for the Meraki to send other information besides standard Radius information, I tend to doubt you will have anything else to profile off of.