MR76-HW With external antenna

JD1974
New here

MR76-HW With external antenna

Hello,

For an outdoor installation we have a MR76-HW AP. As we can't place the AP near the antenna's I would like to know what the max lenght of COAX-cable and prefered antenna is to cover a area of +/- 35 metres arround the antenna Area is mainly open.

Thx

1 Reply 1
TBHPTL
A model citizen

It depends....Not all coax is equal. You must perform the calculations. I would use nothing  less than LMR400 and you will most likely need lightning arrestors and you must account for signal loss for each connector and make sure your coax runs/legs are exactly the same length for each element. You may want to hire a professional. https://www.qsl.net/co8tw/Coax_Calculator.htm

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels