MR76 - Connected and disconnect

[npnitin]

we are using MR 76 AP in our environment.

We are facing the below issue:

IoT devices connected to AP for less than 1 min then move to another AP and stay there for 1 min after that disconnect and then connect to the other AP.

AP to AP distance in 12-17 meter.

Please assist me in this regard

[EJN]

I don't have the answer, but see if this helps:

https://documentation.meraki.com/MR/Bluetooth/Bluetooth_Low_Energy_(BLE)

[GreenMan · Accepted solution]

Are the devices communicating via bluetooth or WiFi?   To my knowledge both of these technologies leave any roaming decisions to the client device itself  (so check documentation and config / firmware options for those)    If it's WiFi, check to see if there are any AutoRF-related reconfigs of the APs, at the times in question - changing channels or Tx power, that might affect the client's decisions.   You could consider fixing those WiFi parameters through an RF Profile:    https://documentation.meraki.com/MR/Radio_Settings/Manual_Channel_Selection%2C_Transmit_Power_Adjust...

[PhilipDAth]

Is this causing a problem?  Clients should be able to roam seamlessly.