MR76 / ANT-76 - P2P Query

[ITD-Luke]

Hi Community,

I thought I'd put this in to ask, essentially, we're needing advice in terms of the usability of an MR76, ANT-76 for creating a P2P between two locations, the variables are:

1. The main site is 200M away from the existing MX that is connected to a leased line.

2. The new office will have an MS-1308P and an MR36 in.

3. The MR76 & Antenna will connect to an existing MS24P port in the cabinet at the main building, then the MS-138P in the new office.

Will this realistically be the best solution in terms of providing a connection, if the speed will accommodate the 500mb line to the new office? I've done basic checks, but I want to know if anyone has had experience with this and if it'd be a viable solution, or if there's one better to fit these requirements.

Regards,

Luke

[alemabrahao]

From what I understand, you want to use mesh, right?

https://documentation.meraki.com/Wireless/Design_and_Configure/Architecture_and_Best_Practices/Wirel...

Viable? Yes, if you have clear LoS and can accept ~200–400 Mbps.
Best solution for 500 Mbps guaranteed? No. For that, use a dedicated P2P wireless bridge or fiber.