MR56 access points & MS250/350 switches POE

[RichardCorn]

Can we connect a MR56 Access Point to existing Meraki MS350-48LP or MS250-48LP switches using the switches POE capability, wasn't sure it would have enough power to service it?

Thanks in advance

[rwiesmann]

The MR56 needs PoE+ (802.3at).

https://documentation.meraki.com/MR/MR_Overview_and_Specifications/MR56_Datasheet

MS250-48LP

https://documentation.meraki.com/MS/MS_Overview_and_Specifications/MS250_Overview_and_Specifications

MS350-48LP:

https://documentation.meraki.com/MS/MS_Overview_and_Specifications/MS350_Overview_and_Specifications

Sure you can, but not on all 48 Ports

[Speedbird1]

Sure you can we have the same switches 

but as @rwiesmann says not on all ports 

If your switches are stacked, you can split the load between the switches so you don't go over the power threshold for the LP model switches.