MR44 + fortigate

Solved
CristianIDL
Conversationalist

MR44 + fortigate

hello everyone,

I have connected MR44 access points connected to a cisco switch and this one with an output to the internet through fortigate.
I have the following problem... I can not ping between the devices connected by WIFI. the dhcp server is delivered by the fortigate. when making a VPN IPSEC connection I only reach the local IP of the fortigate, not the remaining IPs of the lan network.

I would appreciate your help in resolving this.

Translated with www.DeepL.com/Translator (free version)

1 Accepted Solution
cmr
Kind of a big deal
Kind of a big deal

Make sure you have allowed local LAN access in the Firewall page for the SSID:

1000011397.jpg

If my answer solves your problem please click Accept as Solution so others can benefit from it.

View solution in original post

3 Replies 3
ww
Kind of a big deal
Kind of a big deal

Is the MR running nat mode or bridge mode?

Also check the firewall settings of the MR, it can block traffic using L2 clients isolation or L3 rules

CristianIDL
Conversationalist

is in bridge mode

cmr
Kind of a big deal
Kind of a big deal

Make sure you have allowed local LAN access in the Firewall page for the SSID:

1000011397.jpg

If my answer solves your problem please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels